-top of the range organic floor oil with a hint of cherry colour
-suitable for sealing all types of wood furniture & wood floors
-1L of cherry floor oil will cover between 10 to 30 square m
-this finish can be overcoated with a hardwax oil from Junckers
-suitable to use on domestic and commercial wood surfaces
-not suitable for overcoating with an oil or water based varnish
Where To Use:
Any wood surface that got treated with a wax or an oil, it will look 100% natural. The wax will protect the wood against moist and daily traffic. You can use this floor oil on any type of dry wood surface. Any pre-existing finishes have to be removed in full before oiling it again. One coat should provide enough protection but if you are looking for a stronger cherry colour, a second coat might be required. For added protection, you can over coat this oil with a hardwax oil. Do not overcoat with varnishes. Allow good time to dry before using the floor.
How To Use:
Vacuum well the whole floor and clean all the corners with a semi wet cloth. Few hours later you are ready for waxing. You will need a cloth and some gloves to be able to do the job. Shake the tin well and soak the cloth in oil. Apply one thin coat of oil all over the floor. Always start from the area oposite to the door area to avoid having to walk on the newly waxed floor. Do not over soak the floor to avoid long drying periods. The floor will absorb the wax instant and whatever excess oil needs to be removed fast. Job done.
Floor Oil 100% - Cherry Colour 1L