One of the most unique wood stains from Tover. This superb quality light grey wood stain will make any wood surface look cool. Even if the name of this wood stain is light grey wood stain, in fact this wood stain is nearly invisible. It will be absorbed by the wood and it will only add a light hint of grey to the wood fibre. This superb wood stain it will be a great conversation piece.
-our light grey wood stain has a huge coverage area
-suitable for staining all types of wood floors & furniture
-it will enhance the fibre of the wood with a hint of grey
-it requires no training or professional tools to be used
-suitable for commercial and domestic wood surfaces
-it can be used for staining interior and exterior wood
If you are looking for light grey wood stain, you need to try Tover Light Grey Wood Stain. Most of the floor sanding & floor refinishing companies in Ireland are using our stains. Bear in mind that a wood stain has no protective qualities at all and it will have to be varnished or sealed. Our wood stains are oil based and it can be sealed with water based varnishes or oil based varnishes. You can only stain new wood or wood surfaces that got sanded.
Tover Light Grey Wood stain will require only one application to do its magic. If you are not happy with the results after the initial staining, you can apply one more coat of light grey wood stain or you can go for a grey wood stain. The pictures listed on our website are informative only and the actual finish will depend from wood to wood. Do a sample test before staining the whole surface to avoid wasting your product.
Light Grey Wood Stain – professional results for less!
Find out more information about wood stains:
All You Need To Know About Wood Stain
Understanding the unique characteristics of wood and its source enables an individual to appreciate the degree of beauty and warmth that it brings about to our everyday décor. Wood made furniture is one commodity in the world that almost all people can own and understand that they are the only ones possessing that specific grain pattern and its intrinsic beauty. With wood, every grain pattern is a rare masterwork of texture, splendor, and design. Still, other blemishes and knots that people may presume as a defect can enhance the character and inherent beauty to any particular piece of furniture.
Classification of Wood
Wood is broadly classified as hard and soft. Hardwood consists of leaf bearing wood. Hardwoods are considered more expensive due to their durability. Any cone bearing wood is classified as Soft and is relatively cheap compared to hardwood. When a property value is assessed, the overall appearance, materials, and feel of the property are greatly considered. The demand in the marketplace ultimately affects the value of the property. Simply stated, the more people are interested in your property, the greater the value. If you utilize expensive hardwood in the construction of your property, it could attract a higher valuation.
Like any other material, hardwood in your house is bound to look old with time and lose its aesthetic value. The question is; can you attract buyers to consider still purchasing your property? What you need to understand is that there is the question of perceived value. So finding better ways to improve the appearance will go a long way towards getting buyers to be still interested in purchasing.
As a property owner, you need to dedicate quality time to enhance the overall look and feel of your home. Customers will be attracted by the attractiveness of the interiors. Many homeowners overlook this aspect because they view total overhaul as a costly affair which isn't necessarily the truth. It could be quite simple; adding little wood stains to the original flooring and walls.
What are wood stains?
You might ask. Wood stains are simply color concentrates applied to wooden surfaces to further enhance the look and boost the longevity of the materials. The stain soaks into the wood and offers a decorative and in most cases a preservative finish. Stains also color or darkens the wood.
The types available include: oil-based, water-based and Matte to gloss. After the application of the wood stain, the material will appear completely new, and you won't believe it. It's no brainer, a house that looks new is easier to sell than an older looking one.
Wood stain application is not a new consent in the furniture world. But experts in the domain are well aware that applying wood stain is never a walk in the park. It's quite difficult and time-consuming. It includes stain application with a cloth and wiping off excess in the end. The process takes days to complete. Despite homeowners knowing that wood stain application can drastically improve the appearance of their home, they still disregard it.
Fortunately for these homeowners, there is a new product in the market already causing ripples. It's called Beer Wood Stains. This product has the capability to take the hassle out of the whole wood stain application procedure. The product enables the owner to apply the wood stains carefully only by utilizing the correct spray attachment. In essence, no cleaning and wiping are required.
The moment the wood stain is applied, it takes a few hours to dry up. Once dry, the floor or surface can be buffed up and sealer immediately after. To the homeowner, the job is as simple as that and the whole process takes a few hours. In a nutshell, just by dedicating a few hours to work on your property, you could raise the value of your home by several thousand dollars. That could prove a good return on investment in the long run.
To expound further, a wood stain comprises colorant dissolved or suspended in a solvent or agent. The suspension agent may be alcohol, water, petroleum distillate or the real finishing agent, for example, varnish, shellac, lacquer or polyurethane. Stained or colored finishes, for instance, polyurethane have no capacity to permeate through the wood pores to any larger degree and will ultimately disappear when deterioration of the wood finish occur or intentionally removed.
Many people use dyes and pigments as colorants. What differentiates dyes and pigments are the sizes of the particles. Dyes represent microscopic crystals that easily dissolve in the vehicle whereas pigments have much larger particles and are suspended in the vehicle. Pigments will not color fined grained woods like maple or cherry, but dyes will do. Pigments cannot attach themselves to fine-grained woods with small pores. Pigments, on the contrary, have binders that enable them to attach to other large grained woods.
The kind of wood stain available will either obscure or highlight the wood grain. A lot of commercial wood stains contain both pigment and dye and the depth by which they stain the required wood depends upon the amount of time they are left to sit on the wood. Regardless of suspension agent, pigments will not provide much color to woods with high density. However, pigments will color woods bearing large pores, for example, the pine. Another noteworthy difference between dyes and pigments is that the former are translucent while the latter is opaque. Gel wood stains, on the other hand, are much similar to paints and bear little penetrating ability.
Composition of Wood Stains
The main components of wood stain include binder, pigment, and solvent. The pigment is more predominant in the composition compared to the solvent and binder. Just like the staining and dying of fabric, wood stain is created to add more color to the wood substrate and other materials whilst maintaining the substrate commonly visible. After wood stain application, surface films and transparent varnishes are applied. Ideally, wood stains don't offer a film or surface coating. Nonetheless, the fact that binders come from the same category of film-foaming binders used majorly in varnishes and paints, a little build-up of the film happens.
Comparison of Wood Stains With Paint and Varnish
Just like wood stains, the first application of any paint or varnish is absorbed in the substrate. Because wood stains bear lower levels of binder, the binder originating from the stain exists majorly below the surface. On the other hand, the pigment stays just near the surface. Wood stains that naturally use metallic pigments, for instance, iron oxides are always more opaque. This is because metallic pigments are naturally opaque; also because their constituent particles are larger compared to organic pigments and hence do not penetrate well.
The majority of wood stains used for interiors purposes, for instance, furniture and floors need enhanced finish or vanish application to achieve a gloss finish and for protection purposes. Vanishes can easily be differentiated from wood stains. Vanishes have no pigment or color added and are chiefly designed to form a film on the surface. On the contrary, wood stains can have pigments and color added to them to achieve grey wood stains, black wood stain, and blue wood stain. In the market place, some products are sold as a combination of vanish and stain.
Wood stain come in many varieties and one of them is the siding stain. Its chief characteristic is high velocity, but other varieties can be considerably thin. Paradoxically, siding stains are paint types that don't form a hard film on the surface and don't cover as well. Siding stains are created in such a way that they permeate better in wooden materials. They also contain binders which are more flexible and softer, enabling them to withstand extreme temperatures and knocks compared to brittle, more harder paints.
The siding wood stain has greater protection capabilities against external variables, for instance, water, UV radiation and fungus especially insects and mildew. The different varieties of Siding wood stain are distinguished by the degree of appearance they give to wood. Some oil-based or solvent-based sliding wood stains bear considerable levels of paraffin wax, which apparently can't be painted over, though it is possible to re-stain.
Rate of Absorption
Wood stain application can be easy and hard depending upon the kind of stain, substrate, and ambient conditions. Freshly harvested wood poorly absorbs the wood stain. Aged wood, on the other hand, has a stellar stain absorption rate. A single piece of wood can have varying degrees of porosity. Bias-cut grain and end grain are highly absorbent, hence will accommodate more pigment and a considerable darkening will be registered in those areas. The soft and hard ring will absorb differently. The oak wood, for instance, has characteristic medullary rays that will absorb much less pigment and stay mostly blonde.
Woods that have been heavily washed down with different solvents or subjected to pain strippers may develop increased open grain hence allow in more wood stain than usual. Wood is obtained from a variety of species of trees and can significantly vary in the manner in which they absorb the wood stain. Therefore, the resultant shade and color are mostly as a result of a mixture of wood properties and the wood stain. A classic scenario is the application of Medium-to-dark wood stain on maple. The outcome is always blotchy. But on cherry, the medium-to-dark wood stain is more glowing and gets deeper, with more profound coloration.
Direct sunlight and hot weather affect application of most wood stains. Wood stains that dry faster will be a little difficult to apply in such conditions. In cold and damp conditions, slow drying paints will be difficult to work with because of the extended curing and evaporation period.
White wood stains comprising metal oxides like zinc oxide and titanium dioxide have lower penetration abilities hence remain on the surface. In such scenarios, a little bit of wear certainly, reveals an unstained wood and are also fairly opaque.
Quintessentially, one final rigorous sanding of the wood surface with grit will certainly achieve an even surface and enable easy absorption of the wood stain. Different woods require varied degrees of sanding. For white wood stain on a bare oak floor or softwood, a fine hand prep sanding might be needed using an orbit/vibrating sander (80 or 100 grit). Other hardwoods may be hand sanded using 220 grit. A higher grit may be needed for the darkish organic wood stain on surfaces or furniture. The best hand-sanding sandpaper for bare wood is 'garnet'' though not considered durable. The garnet has numerous advantages including faster and sharper cutting grit and inability to impart color from the grit like silicon carbide and aluminum oxide do. There are other equally effective methods like 'rubbing'' by utilizing rotten stone.
In numerous occasions getting rid of existing stains or cleaning the wood before wood staining with commercial stains will suffice to prevent extensive damage to wood.
Cleaning of Stained Wood
Special considerations need to be put into perspective when cleaning stained wood. The most common stains one can come across are water stains on a stained wood. Stain removal techniques have been highly documented including the use of hot iron. Whatever method you choose to remove stains from stained wood, special care must be taken to ensure no damage is done to the initial wood stain. This is especially vital with antiques.
Reasons Why it is Imperative to Apply Some Stain To Your Furniture or Floor Surfaces
Wood staining to your woodwork is so vital because wood in its natural form on your household furniture ranging from chairs, tables, fireplace inserts and end tables don't resonate or harmonize perfectly with the wall colors and textiles. Wood stains will impart color schemes that go along with the colors of your surrounding and textiles hence bringing about a sense of harmony to the house.
You can often achieve profound beauty in a specific article by applying wood stains. In most occasions, you can easily achieve this milestone by simply changing a cheap or inferior wood to manifest an awesome and expensive look by just applying a simple wood stain. The resultant color from wood stain application might manifest unsuspected beauty and quality in the wood, by emphasizing contrasts and bringing forth eye-catching traits which were not emphasized on the initial unstained wood. The wood stain reaction on cells or flakes of the medullary rays and its impact on the mass of the fiber of wood and its massive absorption by the broken cell cavities or open pores are all fundamentals of enormous surprise that are so exhilarating and vary depending upon the kind of wood.
Wood stains naturally cool or tone down unpleasant characteristics of the wood to the eye. At times it's just as simple as staining one section of the wood to match the overall appearance of the wood.
Staining is Ideal If You Want To Give Your Wood An Aged Effect, For Instance, Weathered oak.
Wood is constantly exposed to harsh elements of the weather. You can reap the fruits of durability in the wood by utilizing wood stains. Preservatives made from creosote oil are particularly essential for wood finishes as no other finish is applied on top of it. Most oil stains contain considerable quantities of drying oil, for example, linseed oil which will preserve and protect wood through the vanish-like coating that stays behind as covering after the paint dries out.
Oil-based Verses Water-based Wood Stains
When contemplating choosing wood stain, three questions must be put to perspective when trying to compare Oil-based and Water-based stains. The first is, how fast do I want the stain to dry? Second; are my ventilation conditions adequate? And third; which color do I want my wood stain to be? Water-based stains have the following characteristics: they have faster drying periods, They have an array of color assortment, for example, you can get blue wood stains, black wood stains, grey wood stains just to name a few and they have low odor. On the contrary, oil-based stains have longer drying spells, so they are best suited for intrinsic projects that need an eye out for detail and finesse. Nevertheless, oil-based stains need much ventilation and are only available in traditional wood tones.
Choosing The Best Wood For The Best Wood Stain Results
Oakwood is by far the most recognized and the best wood for applying wood stain. Pine tree is equally good and has an upper advantage of being easy to work with. It's imperative to know that wood of lower quality and lot of knots won't bring about the glamorous look you desired. High-quality lumber is your best bet for satisfactory results.
Try out Pre-Stain Conditioner
If you chose water-based wood stain for your house makeover, try out pre-Stain conditioner. Pre-Stain Conditioner enables your piece of wood stain uniformly. After you've already pre-Stained the wood, ensure that you sand it lightly by use of grit sandpaper that is fine. The sanding process brings open the wood pores and gets rid of any scratches that emanated from the stores or in the process of moving the wood.
When contemplating wood staining, you must know that there is more to it than just applying wood stain to a wooden surface; therefore you should not just jump to conclusions before you determine which stain fits your wooden floor. The marketplace is saturated with diverse types of wood stains to choose from. They range from homemade, cheap to the most expensive. You can cut yourself some slack by making wood stain at home. It is quite simple; you can mix coal tar and kerosene together. There is a downside to this process, however; Kerosene and tar don't seem to gel well. In fact, they may seem not to mix at all. But you need to be patient and keep stirring or shaking. The tar will eventually begin to dissolve into the kerosene. The perfect outcome, however, will depend upon your mixing ratio, so ensure you are as accurate as possible.
You are also at liberty to regulate the lightness or darkness of the finished product by controlling the amount of tar dissolving into the kerosene. An important rule of thumb is to make the homemade wood stain in bulk unless you have the perfect measurements for small quantities. When making in small batches, it's quite hard to obtain the same color result. For immaculate application of the homemade wood stain, utilize a rag and wipe the wood stain on your wood. By wiping the wood stain onto the wood, an efficient and even application will be achieved whilst at the same time enabling the penetration of the stain into the wood. The demerit of the homemade application is you will repeatedly get your hands dirty. But you can mitigate this by stapling some thick cloth onto a nice piece of wood, and you are good to go.
By choosing and applying the right wood stain, you are guaranteed that there will be no streaking and splotching anywhere. When scouting for the best wood stains, look for one that matches the kind of floor and interior in your house. By going all out, you will discover that there are so many wood stains available in the marketplace with different upsides and downsides. The online platform is equally a good place to search for wood paints. The internet has converged and shrunk the continents into is a global village. You can just visit relevant websites, compare the best deals and place your order and it will be delivered right at your doorstep. Alternatively, you can contact family and friends who've had good experiences with wood stains. You might be surprised to find out that one member of your social circle has actually used the wood stain, and he will be glad to point out the exact wood stain you need. Your house wood stain makeover entirely depends upon putting the aspects talked about above in practice. Well no matter what you are going to use your wood for, we are clear on the available staining options and what they should mean.
All this information is informative only. Always respect the manufacturer recommendations.
Tover Light Grey Wood Stain