-water based mono-component high traffic floor varnish
-great resitance to abrasion, alcohol and cleaning products
-suitable to use on medium to high traffic wooden floors
-it will cover 10 to 12 square meter of floor per litre of varnish
-very fast drying time, very natural looking & very cost effective
-suitable for varnishing wood floors, furniture and woodwork
Tover Idrolak DR90 Gloss - Where to use
This super quality water based varnish is suitable for use on commercial floors and domestic floors where a great gloss is required. This water based flor varnish was designed to last for many years even under constant traffic and daily cleaning. It provides superb resistance against alcohol and acidic cleaning products. Tover Idrolak DR90 Gloss can be used for varnishing solid and semi solid wood floors, all types of wood furniture and general wood work. To be used inside only. Suitable for coating wood surfaces that were treated with an oiled based stain.
Tover Idrolak DR90 Gloss - How to use
Only varnish newly sanded floors or floors that are natural unfinished. Do not apply over existing finishes to avoid later issues. It can attach to existing finishes in some cases and it won`t attach to other existing finishes in other cases. To be safe, remove all the pre-existing finishes. Make sure that the floor is dust free and dry. If you have to stain the floor, apply the stain with 24 hours prior varnishing. Apply 1 coat of Tover Idrolak DR90 Gloss and allow up to 2 hours to dry. Do not walk on the floor while the first coat is not dry. Re-sand the whole floor one more time to remove all the imperfection and remove all the dust from the floor. Apply the second coat of varnish and wait another 1 to 2 hours to dry. The third coat of varnish will finish the job. Maintain the floor with proper wood floor cleaners.
Tover Idrolak DR90 Gloss - superb look, superb durability and superb resitance to chemicals!