You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

phone

Text

Please Call 1800 848 700 Before Dropping Around The Shop. All Collection Orders Will Be Ready For Collection The Next Day

home-icon

Categories

  • Cart

  • Your shopping cart is empty!

Carver Delta | Water Based Single Component Floor Lacquer

Carver Delta / 100% Polyurethane Commercial Floor Lacquer


  • Exceptional high traffic floor lacquer suitable for commercial, industrial & domestic use

  • Single pack water based floor lacquer, available in matt and semi gloss

  • It creates a similar look as the old solvent or oil based floor lacquers/sealers

  • It will cover 10-12 sq meters per 1L, to be applied in a two coats system

  • It can be applied directly on the wood surface or over a wood floor primer

  • Best performing floor lacquer on the Taber test : 10 mg, 100% fume free

  • Highly recommended for professional floor refinishing contractors/industry

  • Matt Sheen 15% Gloss, Semi Gloss Sheen 30% Gloss, very quick drying



Carver Delta / 100% Polyurethane Commercial Floor Lacquer - Where to use it


The most beautiful and the most durable water based floor lacquer from the Carver range. A single pack polyurethane floor lacquer suitable for sealing very high traffic commercial, industrial & domestic wooden floors. It provides the same results and even better performance as the old solvent based floor lacquers. Reasonably priced for the performance and coverage. To be applied with a professional varnishing roller over a clean and dry wood floor surface.


Carver Delta | 100% Polyurethane Commercial Floor Lacquer - How to use it


If you are refinishing an old floor, make sure that the old sealer and all scratches are removed in full before you seal the floor. Carver Delta / 100% Polyurethane Commercial Floor Lacquer is compatible with all Carver`s water based and solvent based wood floor primers. Prime the floor well, sand the primer with fine sandpaper (150-180 grit), vacuum the floor & apply the first coat of floor lacquer. Depending on the type of wood, condition, air humidity & other factors, the last coat can be applied after 2-4 hours. Do not drag heavy furniture on the floor for 24 hours. Carver Delta / 100% Polyurethane Commercial Floor Lacquer is a non yellowing floor sealer. 


Carver Delta | 100% Polyurethane Commercial Floor Lacquer - Recommendations


Use the product at minimum 15C. Do not apply the second coat until the first coat is fully dry. This product is not compatible with oil based wood stains. It can be used as an overcoat over pre-existing finishes. Clean all your brushes and rollers immediately after use.


To increase life expectancy & to maintain your wooden floor in top notch condition, please clean and maintain your newly refinished wooden floor with proper wood floor cleaners and maintainers.


Carver Delta / 100% Polyurethane Commercial Floor Lacquer


Overall Rating 0
Write a review
Note: HTML is not translated!
    Bad           Good