Alcohol based wood floor sealer and wood floor primer
Compatible with all types of wood floors and furniture
It will penetrate deep and enrich the wood surfaces/fibre
It will cover around 12 Sq meter per 1L, very fast drying
Suitable for commercial and domestic wood refinishing
To be applied with a roller, brush or primer applicator
Can be overcoated with any solvent or water based sealer
Highly popular with the professional floor sanding industry
It reduces lacquer absorption and creates a fine finish
Faber Isolante 65 / Alcohol Based Wood Primer - Where to use
Faber Isolante 65 / Alcohol Based Wood Primer can be used pretty much on all new or newly sanded wood floors & wood surfaces. The primer will penetrate the wood deep and will enrich the colour while creating a perfect base for further coatings. The primer will reduce lacquer absorption and will speed up the drying process. 1L of Faber Isolante 65 / Alcohol Based Wood Primer will cover around 12 sq meters but the final coverage will depend on the type of wood & the roughness of the wood. Suitable for commercial and residential projects.
Faber Isolante 65 / Alcohol Based Wood Primer - How to use
Make sure that the wood is sealant free, dry and dust free. Apply 1 coat of Faber Isolante 65 / Alcohol Based Wood Primer with a varnishing roller or a brush. Always go along with the fibre of the wood not against it. The surface has to look wet but not over soaked. One coat of wood floor primer is more than enough. Allow about 1 hour to fully dry and sand the floor one more time with fine grit sandpaper to remove all imperfections and wood spikes. Vacuum the whole area well and apply two coats of water based floor lacquer or solvent based floor lacquer.
Faber Isolante 65 / Alcohol Based Wood Primer - Recommendations
Bear in mind that Carver Isolante 65 is an alcohol based wood floor primer. Work in well ventilated areas only, wear a mask while applying it & do not smoke or use near a naked flame. Do not apply lacquers until the primer is 100% dry.