Karbosan 180 MM Velcro Sanding Discs - Where to use
Karbosan 180 MM Velcro Sanding Discs are highly recommended for professional floor sanding services and general heavy duty use. The 24 grit will remove all types of paints, glue and heavy duty dirt deposits. The 40 grit will level up the floor and will create a perfect smooth finish. The 60-80 grit is suitable for final leveling and it will remove all scratches done by the 24-40 grit. 100 & 120 grit are suitable for very fine sanding. It can be used for sanding wood floors, natural stone floors, painted surfaces, wall, steel, etc. Compatible with all types of sanding machines that are fitted with a velcro pad
Karbosan 180 MM Velcro Sanding Discs - How to use
Depending on the type of sanding you plan to do, you always have to go down on grit. If the floor is very uneven and if there are many coats of sealant on it, you should start with 24 grit. This is very aggressive sanding. After the floor looks sealant free and even, you have to start re-sanding the floor again with 40 grit. The next step is 60 grit. Then 80 grit. After the 80 grit you are ready to seal the floor. The 100 & 120 grit are sanding discs that are usually used between coatings. Never skip from 24 to 80 grit. The scratches generated by the 24 will still be visible after using fine sandpaper.
Not all sanding discs are the same. Some sanding discs wear off pretty fast and to complete a decent size job you would need to use alot of them. Well, Karbosan 180 MM Velcro Sanding Discs are top quality. Many floor sanding contractors & painting contractors only use Karbosan. The pads last much longer than other similar sanding discs and the price is also lower. Try Karbosan 180 MM Velcro Sanding Discs today. You will be impressed