Faber Acid Cleaner 1L

Product Description

Faber Acid Cleaner 


  • Heavy duty acidic tile cleaner, water based and highly concentrated

  • Suitable for removing cement residue, grout and inorganic residue

  • The perfect product for deep cleaning post-installation wall & floor tiles

  • It can also be used for heavy duty cleaning of showers and wet areas

  • Safe to use on most artificial and natural stone surfaces

  • Not recommended for acid sensitive surfaces, plastic and wood floors

  • To be diluted in warm water 1 to 20 (it can vary) and allowed to pre-soak

  • It works fast and it helps removes residue without a lot of scrubbing

  • This product is highly appreciated by the professional tile cleaning trade


Faber Acid Cleaner | Why Use It


The residue left by the builders after the installation of wall tiles or floor walls can be pretty challenging to remove. Most heavy duty alkaline bathroom cleaners might make a dint in the dirt but not enough to say that satisfactory results were achieved. The new Faber Acid Cleaner was created exactly for this particular job. To remove all types of grout residue, tile adhesive or impregnated building residue. Residue is the main word here. It will not dissolve concrete from the tiles but it will definitely get rid of all types of construction and post-installation residue. A number of treatments should be done until the dirt is removed in full.


Faber Acid Cleaner | Where To Use


The new Faber Acid Cleaner can be used on most natural stone tiles, all artificial tiles, concrete tiles, terrazzo floors & walls, etc. Not compatible with acid sensitive surfaces or very sensitive floors. Pre-testing is highly recommended before using on a larger scale. It can be used indoors and outdoors. The product's main job is to remove all kinds of residue left after the installation of floor or wall tiles, but it can also be used for getting rid of salt effervescents on wet areas, deep impregnated dirt, some organic residue like mould and body fats, etc. The new Faber Acid Cleaner is very easy to use and it provides results in no time. Some very badly affected areas might require pre-soaking.


Faber Acid Cleaner | How To Use


The recommended dilution rate is informative only. It all depends on the condition of the tile. If the job is very tough, then a lesser dilution will make the product stronger and much more aggressive. If the tiles are in good shape but here and there you can see a bit of dust or some light grout residue, then the maximum dilution should be applied. Either way, the product has to be diluted before use. Mix it with warm water to increase its cleaning power. It can be used with a spray bottle or with a mopping solution. Apply the product to the affected area and allow direct contact for a few minutes. Do not use steel, copper or aluminum scourers on tiles. Scrub the surface with a green, black or blue catering scourer or floor pad. You want to remove the dirt but to leave the tile without scratches. Scrub, rinse, dry. Assess the results and repeat the process if necessary. There is no magic solution for this issue. You will need to take your time and repeat the operation until the surface looks spotless.


Faber Acid Cleaner | Safety


You are handling an acidic based wall and floor cleaner. This product can cause severe burns and it can negatively affect your health if inhaled or ingested. Wear gloves and a safety mask at all times and protect your eyes with safety googles. Work in well ventilated areas and work on small surfaces unless you are a professional that has done it many times and you know how to handle chemicals. This product can provide outstanding results in the hands of proper users or serious damage if misused. Do not use the product on any sensitive surfaces (furniture, laminate floors, polished floors, painted walls, etc). Its main job is to remove building residue.


Faber Acid Cleaner 


Write a review

Note: HTML is not translated!
    Bad           Good

When you order from cleanfast.ie, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!