Prochem Solvall Spotter 1L
Prochem Solvall Spotter 1L
One of the common problems cited in regards to cleaning dirt spots on carpets has to do with the formation of invisible sticky residues. These residues continually attract dirt from the air and the soles of shoes that get in contact with them. Not only does this mean the carpets get dirtier at a much faster rate but also, in the long run, it drastically shortens the carpet’s life by accelerating wear and tear.
So, how do you prevent the formation of these invisible sticky residues as well as ensure your carpet remains cleaner for longer? The answer is to use a potent cleaning solution that is efficient in the removal of oil based stains. The Prochem Solvall Spotter 1L is one such solution.
This is a high performance carpet cleaning solution that is a combination of quick drying solvents and is specially engineered to eliminate the minutest of oil stains such as bitumen, tar and grease. It is also highly effective in the removal of other substances such as cosmetic stains, gum and even paint – to name a few.
Here are a few things to keep in mind about the Prochem Solvall Spotter 1L.
Where to use?
The Prochem Solvall Spotter 1L is a versatile cleaning solution that works on a variety of surfaces including carpets, upholstery and even hard flooring material such as ceramic, laminate, marble and even cork. Although it is primarily a carpet cleaning agent it has shown remarkable success in eliminating stains and spots from the other aforementioned surfaces as well.
How to use?
The method of use is consistent across all surfaces.
Disclaimer: This product is highly potent and should be used with extreme care. For this reason it is usually recommended for industrial and commercial use. It can also be used domestically provided the guiding instructions are followed to the letter.
The user must thoroughly read through the safety sheet that accompanies the product.
No water should be added to the solution. The spotter is highly stable and ready to use as is.
iii. The user needs to pre-test a tiny portion of the solvent on the desired surface before massive use. This is because some carpet materials are averse to the solution. The pre-testing should be done in an inconspicuous area that is well ventilated and that is free from people and pets.
Protective clothing, gloves, eye and face protection should be worn at all times during the pre-testing phase and the actual use.
Application involves pouring a little Solvall onto the affected spot and blotting the area with a towel. Be careful not to over apply. Very important: DO NOT SPRAY! DO NOT RUB!
When dealing with tough stains allow the spotter to penetrate deep into the fibers before blotting.
vii. Where necessary, you can repeat the process. Always blot from the outside of a stain towards the center when dealing with large spots.
viii. To finalize the process, spray a fabric restorer – which is a blend of strong detergents – onto the cleaned area. This will remove any resulting ring marks from the surface. You can brush the fabric afterwards to align the fibers.
The Prochem Solvall Spotter 1L retails for less than £20.
This cleaning solution is among the best in the market and guarantees to save users a lot of money that would otherwise be spent in hiring a carpet cleaning company or replacing an absolutely stained rug. It’s a product definitely worth considering.