You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

home-icon

Categories

  • Cart

  • Your shopping cart is empty!

Junckers Base Prime

Junckers Base Fill Wood Floor Primer


-high quality solvent based wood floor primer/sealer

-suitable for priming hardwood and semi solid floors

-will create a warm darker finish on all wood floors

-to be applied over new wood or newly sanded floors

-will cover around 10 ro 12 sq meter of wood per 1L

-can be overcoated with water based or solvent sealers

-ready to use, no dilution required, to be applied in 1 coat

-will fully dry in about 1.5 hours, has to be overcoated

-high coverage area, fast drying, relatively low odour




Junckers Base Fill Wood Floor Primer - Where to use


Junckers Base Fill Wood Floor Primer is a professional solvent based wood floor primer that can be used to prime and seal any type of solid or semi solid wood surfaces. The product has to be applied directly on the wood. The surface has to be sealant free, dry and clean. Junckers Base Fill Wood Floor Primer can be used for priming wood floors, frames, windows, furniture, statues, etc. The product will penetrate deep and will create a perfect base for the varnish/lacquer. By using a primer you will reduce the varnish absorption and you will also reduce the costs. The primer will create a warm effect on bright wood surfaces.



Junckers Base Fill Wood Floor Primer - How to use it


The surface has to be sanded well before priming it with Junckers Base Fill Wood Floor Primer. The wood needs to be sealant free, dry and dust free. Using a small brush you can apply the primer around the edges. Larger areas can be primed with a varnishing roller. Apply 1 thin coat of primer going along with the fibre of the wood. Do not allow the primer to puddle on the surface. One coat of Junckers Base Fill Wood Floor Primer will do the job. The primer will dry in about 1 to 1.5 hours. The whole area has to be lightly sanded again and you are ready for varnishing. Work in well ventilated areas.


Junckers Base Fill Wood Floor Primer - Coverage area


The recommended coverage area is somewhere between 10 to 12 sq meters per 1 L. Softwood floors will absorb more while hardwood floors will absorb less. Either way, Junckers Base Fill Wood Floor Primer is a market leader for its coverage. Do not sand the surface with very fine sandpaper before priming - the pores will close and the wood will not be able to absorb the primer evenly.



Junckers Base Fill Wood Floor Primer - Safety


This is a solvent based wood floor primer. Like any combustible product, Junckers Base Fill Wood Floor Primer cannot be used near naked flames or any type of heating system. Work in well ventilated areas. No special training is required to use this primer but follow the safety instructions carefully.


Enhance the look of your wooden floors with Junckers Base Fill Wood Floor Primer. Create a warm finish even on very bright types of wood surfaces. All junckers wood care products are suitable for commercial use. 


Junckers Base Fill Wood Floor Primer

Overall Rating 0
Write a review
Note: HTML is not translated!
    Bad           Good