Amtico Dressing Satin

Amtico Dressing Satin

• Easy to apply water based floor polish compatible with all Amtico floors

• It enhances the look of the Amtico floor and it protects against staining

• It can be applied with a flat mopping system or a special polish applicator 

• To be applied over a clean and dry Amtico surface that was fully stripped

• To be applied in 1-2 coat system with about 1 hour break between coats

• Sold in a bottle of 1 L or 5 L | A non yellowing water based floor sealant

• It covers around 30 square meters per 1L but it can vary from floor to floor

• A very durable Amtico floor polish compatible with intense traffic floors

• Suitable for commercial Amtico polishing and residential Amtico sealing

• The product dries quickly and it can be easily applied by residential users

Amtico Dressing Satin | Why Use It

The new formula Amtico Dressing Satin is a beautiful sealer for all kinds of commercial and residential Amtico floors. It looks great, it dries fast, it enhances the look of the Amtico floor without creating an artificial coating. The new Amtico Dressing Satin is a professional floor sealer that creates a barrier between the floor itself and foot traffic. It helps with the daily maintenance and it transforms dull Amtico floors into beautiful and elegant floors. 

Amtico Dressing Satin | Where To Use

The new Amtico Dressing Satin is a professional quality water based floor polish that is compatible with all types of Amtico floors. It can be successfully used on floors, stairs and all kinds of vertical Amtico surfaces. The new Amtico Dressing Satin is also compatible with other types of plastic floors that are water based polish compatible. Unlike other types of water based floor polishes, the new Amtico Dressing Satin is a non glazer, non glossy and non slippery finish. It can be used for polishing and maintaining indoor and outdoor floor surfaces (sunrooms or roofed external areas).

Amtico Dressing Satin | How To Use

Surface preparation is essential for achieving amazing results. The new Amtico Dressing Satin can only be applied over clean, unsealed and dry Amtico surfaces. To be able seal and protect your surfaces correctly, please follow the following steps:

1. Remove all old sealers and old protectors from the Amtico floor. Use the Amtico Stripper to remove all pre-existing finishes.

2. Deep clean the surface with a heavy duty floor cleaner if the floor was never sealed before and allow the floor to dry.

3. Apply 1 thin coat of floor polish moving along with the fiber of the floor. The Amtico Dressing Satin will fully dry in a matter of minutes but the last coat of dressing should not be applied before 2 hours have passed between the coats.

4. Maintain and clean your floors with the new Amtico Maintainer to fully protect the new sealer and remove all dirt residue.

Amtico Dressing Satin | Recommendations

Do not apply the new Amtico Dressing Satin over pre-existing finishes without firstly removing the old sealers. Do not apply the new Amtico Dressing Satin over dirty or wet surfaces. Do not dilute the new Amtico Dressing Satin and do not apply thick coats of it. One coat should provide enough protection in a domestic household but a maximum of two coats are recommended for commercial Amtico floors. Do not drag heavy furniture on the newly polished Amtico floors. Leg protectors should be installed on sofa and tables legs. While anyone can use the new Amtico Dressing Satin, there are some tools required to be able to seal larger floor areas. Make sure to use clean flat mop heads and clean applicator heads. Wash your floors regularly with a diluted Amtico maintainer. Store the product away from direct sunlight.

Amtico Dressing Satin