Faber Coloured Stain Remover 500 ML

• A professional heavy duty colour stain remover for all natural stone surfaces

• Safe to use on all natural stone surfaces, ceramics, stoneware, cotto, concrete

• It will fully remove coffee stains, tea stains, red wine stains, juice, ink, marker, etc

• Also highly effective against a wide range of stains caused by mould and algae

• Thanks to its gel like composition this product will attach nicely to vertical surfaces

• It will only react with the stain itself and it will not negatively affect the stone surface

• Once applied to the surface there is no need to scrub it or to agitate it with brushes

• Suitable for indoor and outdoor use | 500 ML will cover a pretty large surface area

• The new Faber Coloured Stain Remover 500 ML is 100% water based & fume free

• Suitable for light residential use and also for heavy duty commercial stain removal

Faber Coloured Stain Remover 500 ML | Why Use It

When a dark coloured stain penetrates a natural stone surface, removing it is nearly impossible. While most surface cleaners will remove some of the surface stain, whatever residue has managed to penetrate the stain will be left there and be visible forever. That used to be the case but the new Faber Coloured Stain Remover 500 ML has transformed the stain removal industry. This outstanding product will effortlessly remove wine stains, coffee stains, juice stains, ink stains, algae stains, mould stains & other types of stains. Even better, there is no scrubbing needed at all. A professional quality stain remover compatible with both horizontal and vertical surfaces.

Faber Coloured Stain Remover 500 ML | Where To Use It

If you have a natural stone surface that was stained by a dark stain, then you can really benefit from the new Faber Coloured Stain Remover 500 ML. This product is fast acting and it can be used on all types of polished or unpolished surfaces without the risk of damaging the base surface. Suitable for indoor and outdoor use. The product is ready to use and it does not require any dilution. It can be used on marble, concrete, slate, sandstone, limestone, paving, cotto, glazed ceramic tiles, granite, porcelain, all countertops, worktops, etc.

Faber Coloured Stain Remover 500 ML | How To Use It

Remove any dirt from the surface. Apply the product directly on the affected area without dilution. Do not scrub and do not agitate. The product was designed to react with the stain, emulsify it and extract it. It takes anything between 20 minutes to 2-3 hours for the product to work. Only remove the product from the surface when the stain that was treated has evaporated. If you are treating large surface areas affected by mould, then you can use a special applicator to apply the product all over the affected area. You can extract the product from the surface with cleaning towels, microfiber cloths or a wet vac if you are treating large areas. Wash the surface with clean water and only open the area to traffic after the surface is fully dry.

Faber Coloured Stain Remover 500 ML | Safety

This is a highly active product so try to avoid direct contact with the product. Wear a pair of gloves and protect your eyes. Never mix the product with other stain removers from other brands. If the desirable results are not achieved after one treatment, do it again later. The product has the capacity to fully penetrate any compact surface. Only use cleaners and maintainers from the Faber range.

Faber Coloured Stain Remover 500 ML