Faber Tile Cleaner | Acidic Cleaner

• Slightly acidic tile cleaner compatible with all acid resistant floor and wall tiles

• It removes deep impregnated dirt and old patinas & discolorations

• The product is capable of penetrating deep inside the tile and extracting residue

• It will remove dirt residue from the top of the tile and from inside the tile

• The product is highly compatible with old, porose and badly stained floor tiles

• Highly concentrated, fast acting, pretty safe and very easy to use on all floors

• Suitable for residential tile cleaning projects and also for commercial tile cleaning

• It can be used with a standard mopping system or with a scrubber drier

• The recommended dilution rate is 1 to 20 but it can be increased / decreased 

• A premium quality floor cleaning detergent for tough floor cleaning projects

• Faber Tile Cleaner | Acidic Cleaner can be used in conjunction with a scrubber

Faber Tile Cleaner | Acidic Cleaner | Why Use It

Some floors with intense traffic are likely to absorb and retain a lot of dirt residue inside the tile and on the top of it. A daily floor cleaner or a maintainer might not have the necessary cleaning power to deal with such tough jobs. But the new Faber Tile Cleaner | Acidic Cleaner was made for exactly these kind of tough floor cleaning projects. Its acidic composition will enable the product to dissolve, emulsify and break apart pretty much all types of impregnated & top dirt from all acid resistant surfaces. Used with the right dilution and with the right technique, the new Faber Tile Cleaner / Acidic Cleaner will restore the original look of your floor tiles and will remove all general stains from it. This is not a product suitable for daily floor cleaning and maintenance. 

Faber Tile Cleaner | Acidic Cleaner | Where To Use

On all natural and artificial floor tiles that are acid safe. The product will provide outstanding results in areas of constant water flow like changing rooms, shower rooms, bathrooms, kitchens, halls, balconies, patios, etc. Old stubborn dirt can really affect the appearance of some tiles. A quick wash with the new Faber Tile Cleaner | Acidic Cleaner and the tile will be restored to its original condition. Safe to use on vertical and all horizontal surfaces. Highly recommended for residential floor and wall cleaning projects. This product will achieve the same results as if it was done by a professional floor cleaning company but for a fraction of the cost. 

Faber Tile Cleaner | Acidic Cleaner | How To Use It

Dilute the product accordingly with the project requirements. The dirtier the floor looks, the less the dilution needed. For a very dirty floor you can use a dilution of 1 to 2-3. For light floor cleaning projects you can increase the dilution rate to 1 part product and 5 parts water. The essential thing is to apply the product to the floor and to allow it to work. There has to be direct contact between the product and the floor for at least 10 minutes. Within this time you can scrub the floor around the edges. After about 10-15 minutes (depending on the condition of the surface) you should start the scrubbing operation. You can use a deck scrubber, a floor pad or a low speed floor buffer if one is available. Make sure to scrub the whole area evenly. Extract the waste and inspect the project. If some patches are still visible, wash the floor one more time. 

Faber Tile Cleaner | Acidic Cleaner | Safety

From the name of this product you should understand that it is acidic and acids can really burn. Do not use the product without hand protection and protect your eyes at all times. Do not mix the product with any other acid cleaners to avoid generating fumes or creating permanent damage to the floor tile. 

Faber Tile Cleaner | Acidic Cleaner