Deep penetrating blend of organic oil for protecting and maintaining wood surfaces
When applied to light types of wood surfaces it will create a light yellowish finish
It provides superior protection against all types of stains, liquids and daily traffic
It facilitates easy maintenance of the surface while enhancing the look of the wood
The product can be used as the main oil protector or it can be used for maintenance
To be applied with a microfiber cloth, a roller, a varnishing brush or it can be sprayed
Compatible with all indoor wood surfaces like wood tables, chairs, worktops, doors
The new Nordicare Danish Oil 250 ML is manufactured from quality plant extracts
To be applied to new, newly sanded or previously oiled wood surfaces | furniture
Its coverage area can vary depending on the wood porosity and the type of wood
The product will be touch dry within 2 hours but it requires 24 hours before traffic
Nordicare Danish Oil 250 ML | Why Use It
A beautiful looking natural blend of organic oils with enhancers. The new Nordicare Danish Oil 250 ML is the ideal oiled surface refresher or the best sealer for unsealed wood surfaces. It looks spectacular on oak wood, cherry, beech & other types of wood. It will fully penetrate the wood and it will enhance the colour of the wood surface without glazing it. The product is 100% fumes free, easy to apply and it dries in a matter of hours. Suitable for all kinds of indoor wood sealing. Not compatible with wooden surfaces that were sealed with a water based or a solvent based lacquer | polish.
Nordicare Danish Oil 250 ML | Where To Use
A green and eco-friendly protective oil compatible with all unsealed or oil sealed wood surfaces. The product can be used to impregnate new wood surfaces or to refresh pre-sealed oiled surfaces. Due to its organic nature, the new Nordicare Danish Oil 250 ML is compatible with all kinds of wood worktops, wood furniture, wood handles, wood doors, wood frames, wood toys and other types of wood surfaces. Highly recommended for waterproofing and stain proofing indoor wood surfaces. Using this product cannot be any easier and it does not require any expensive tools or equipment.
Nordicare Danish Oil 250 ML | How To Use It
Making sure that the surface is residue free, dry and stain free is the first step. The oil can be used as a sealer or as a maintainer. When it is a new surface being sealed, the user has to make sure that the wood was sanded properly and finished with 120 grit sandpaper. When dealing with already sealed surfaces in need of a refreshing, then the surface has to be degreased and all dirt extracted from the fiber of the wood.
Apply a thin coat of the new Nordicare Danish Oil 250 ML all over the surface. The coat has to be evenly applied without any missing patches. Allow it to dry for about 20 minutes and then remove all excess oil with a clean microfiber cloth. When sealing new wood, at least two coats of oil are required with 24 hours break between the coats. The surface will be ready for use within 24 hours.
The product is ready to use and does not require any dilution. Do not over soak the floor and do not forget to remove the excess oil within 20 minutes. Any cloth or any rag used in the process of sealing the surface has to be soaked in water before being disposed of. If accidentally swallowed, call the doctor immediately. Do not leave the product exposed to direct sunlight. Keep the product away from children and pets.