-not suitable for overcoating with a floor lacquer
How To Use:
Apply this quality floor oil on a dry and dirt free surface. Only apply small amounts of oil and do not soak the wood. Any excess to be removed fast to avoid long drying times. Apply with a towel coat if you are treating small surfaces or a white buffer pad if you are waxing big floor areas. The product is ready to use so no dilution is required. The drying periods can vary from surface to surface but in any case you should allow 2 ro 24 hours for drying. It can be overcoated with a hardwax oil for enhanced protection.
Where To Use:
To provide full protection, the floor oil needs to be fully absorbed by the floors. This will only be possible if the wood surface has no finish on it. To be used only on new or newly sanded wood surfaces. Bear in mind that this product is a natural oil and it needs time to dry. If a second coat is required, please make sure that the first coat is fully dry. You can wax any type of wood furniture or wood floor. 1L of oil will cover a standard living room or three standard bedrooms. The coverage area can vary greatly from area ro area.