Maintain Tile Joints With The Faber Grout Cleaner

For buildings with tiles, one common problem is prevalent: dirty grout. It rapidly deteriorates the decor of the space, and is not something you can ignore. Grout – the material applied between tiles to hold them together and fill up the space between the adjacent tiles, is a porous material. This trait causes dirt and grime to easily penetrate the material and adhere to it. Liquid substances are readily absorbed by the grout, and depending on the chemical composition of the liquid involved, can cause issues ranging from discoloration, to the grout getting weakened. The Faber Grout Cleaner under review has been particularly formulated to deal with such problems.

Why Does The Grout Get Dirty?

One of the most common causes is dirty mop water. Here, instead of the water clearing away the residue, it spreads dirt into the grout. Due to the mature of the installation, the grout is actually in a lower position compared to the adjacent tiles, so the mop water will naturally settle into it. So, while the mopping is being carried out, some of the dirt that is cleared away from the rest of the surface gets transferred to the grout. The very nature of the grout also makes it a hotspot for mould and mildew growth.

Next is the kind of traffic handled in the facility. People walking on the tiles with shoes on inadvertently lead to dirt getting carried to the tile and grout. Add this to staining from the liquid and drink spills – the effect can be frustrating to remove. Conventional surface cleaning products may be effective in dealing with the tiles themselves, but the grout requires its own specialized attention – that’s where the Faber Grout Cleaner comes in.

Making Your Grout Look All New Again With Faber

The Faber Grout Cleaner is an alkaline-based detergent that gets rid of the greasy dirt and grime that has been building up in the grout. The deep cleaning enables you to remove the substances that have been absorbed within the grout, restoring the original appearance of the joints. Old dirt, gunk that has been accumulating from traffic on the tiled floor – this is all got rid of. In addition to deep cleaning grout widths, you can also use the Faber Grout Cleaner to get rid of the cement-based material that has been left behind from construction or renovation projects on acid-sensitive materials. It is tough on the dirt, but gentle on the surface. You can use it on natural stone installations like marble and granite, all through to ceramics and porcelain stoneware, and other surfaces that are alkali-resistant. Note that it is recommended that you first conduct a spot to test on an inconspicuous area to check the suitability of this formulation for your particular kind of installation – especially if the material has not been expressly included as one of the installations that you can use the Faber Grout Cleaner on.

Fast Acting Detergent

With this formulation, giving the grout a thorough clean is simple and straightforward. Just mix it with water, then proceed to work on the target area. For the ideal dilution, this will depend on how stubborn the dirt is. For most cleaning tasks, a 1:4 ratio will be enough. If you encounter more stubborn grime, then you can use it less diluted. The chemical action of the detergent breaks down the grime, allowing you to clear away the residue easily, after which you’ll only need to rinse the surface, and you’re good to go.

In order to achieve more uniform results with the joints and the rest of the surface, such as when you’re working on the floor, you can proceed to clean the whole area with the detergent. However, ensure that you don’t leave the Faber Grout Cleaner to act on the surface for too long. As is with any other surface cleaning agent, if you’re unsure about the suitability of the product for your particular installation, it’s recommended that you first carry out a spot test on a small unexposed area. The Faber Grout Cleaner can be used on materials like granite, slate, marble (as well as quartz and marble agglomerates), cotto, terracotta, porcelain and ceramic tiles.

Coming to you from Faber

With surface care, you also want to ensure that you’re dealing with a reputable brand. After all, you don’t want to put the structural integrity of the installation you’re working on at risk, and you also want value for your money – where the formulations purchased should deliver on their mandate. Faber comes in as a brand that has been consistently meeting client needs- from professional contractors like stone manufacturers and installers, commercial cleaning crews, to repair personnel, as well as DIY enthusiasts such as home owners carrying out the daily cleaning in their households. The company, which is now an industrial heavyweight in matters of surface care, has been around since 1986, and over the years has developed a wide market base. Its products are sold all over Europe – including England, France and Spain, the Middle East and Asia, all controlled from its central headquarters in Italy. Its presence in multiple markets, a track record that goes back for decades, as well as tonnes of reviews and testimonials left behind by customers who have relied on the brand’s formulations, is testament to the quality that you can expect from the brand – which is what you get when you use the Faber Grout Cleaner.

The formulation gives you value for your money in different ways. For starters, the deep cleaning action protects the grout from degradation, that way you avoid having to make expensive repairs later on. Secondly, since it is concentrated, each unit product purchased gets to cover a wide surface area. The Faber Grout Cleaner has a coverage rate of 10 to 15m² per litter, with the particular rate pending on the dilution you use for your situation. This, coupled with the affordable pricing of the product, enables you to ensure that the surface care needs of your establishment have been met without putting a strain on your finances.

Maintain Tile Joints With The Faber Grout Cleaner