Window Cleaning Made Easier With The Ettore "Taper T" T-Bar

Window Cleaning Made Easier With The Ettore “Taper T” T-Bar

Washers are a core part of the window cleaning process, enabling you to remove build-ups of soiling on the glass panes, those layers of grime and greasy residue. This prepares the surface for the squeegee that will be used afterwards, thus resulting in a streak-free clean. The washer assembly is composed of two main parts: the sleeve and the T-bar onto which it has been attached to. Extension poles come in when you have to reach high windows, such as those on the upper floors. When you pair the Ettore “Taper T” T-Bar with the appropriate washer sleeve for your cleaning needs, you’ll get the task done fast, with less energy involved. This T-bar has been constructed with high impact plastic, making it a durable unit to incorporate into your window cleaning arsenal. It lasts for long, and can be used with the replacement washer sleeves that will be acquired. The extended usage of the Ettore “Taper T” T-Bar thus enables you to make savings over time, while ensuring that you retain optimal performance. From the rubberized grip of the unit, to the ergonomic design that makes it easy to work with, this unit is suitable for both residential and commercial window cleaning tasks. 

Giving Your Windows A Thorough Wash

Washing the glass panes prepares them for the squeegee, that way you will end up with sparkling clean windows. To go about it, start by gathering your supplies. These include the bucket that will be used to hold the solution, the window washing detergent, a scraper, the Ettore “Taper T” T-Bar and washer sleeve, microfibre cloth, and also extension pole if you’re dealing with windows that are out of your reach. 

When preparing the window cleaning solution, ensure that you stick strictly to the dilution ratios that are on the product label- and that you’re working with a formulation that is safe to use on glass. Specialised window cleaning products are developed to remove the soiling, grime and grease, while providing a smooth surface on which the squeegee can glide on. Be careful not to use too much of the detergent- as this will only increase your workload. Lots of foam does not equate to a quicker clean- in fact it will be more exasperating for you. If the solution has lots of bubbles and suds, then there has been too much of the detergent that has been used, or you’re working with a product that is not particularly formulated for window cleaning. Too much detergent will lead to streaks being formed, “bleeding” from the window frames, and it will also speed up the rate at which dirt will accumulate on the windows. Remember to first fill the bucket with water, then add the detergent. 

Gearing up

The tools that will be used will depend on your situation. For instance, in case you’re just going to clean a couple of windows, rinsing the washer under a tap may be enough, then adding some squirts of detergent directly onto it. That way, you won’t spend as much time preparing a solution, filling and emptying the bucket. However, a bucket will be required for many of the cleaning tasks. With this, there is the added benefit of holding the washer above the waterline- which can be done using clips, a shelf or even a moulded holder. This is entirely based on one’s personal preference. Pair the Ettore “Taper T” T-Bar with the appropriate size of washer sleeve. The T-Bar comes in 10-, 14-, 18- and 22-inch alternatives. 

Since washing windows can take a long time, you want to work with tools that will cut down the duration spent on each section. using sponges or rags will draw out the process- which is why professionals opt for the window washer- basically the assembly of the washer sleeve, Ettore “Taper T” T-Bar, and extension pole if needed. There are those who call this assembly a scrubber, or a washing wand. It gives the user more control when working on the windows that are soiled and smeared with grime. 

Before you proceed, ensure that the washer is clean. Transferring soiling from previous window cleaning sessions will only lengthen the task. Any lint that is on the fibres should be removed, that way you can proceed to focus your efforts on the target windows. 

The window cleaning process

1. Begin by dipping the washer into the bucket with the cleaning solution. 

2. Squeeze out the excess water. One can use the hand, or the bucket fitting for those with specialised units that have been designed for the task. 

3. Start with the window borders, washing them and ensuring that you pay keen attention to the frame corners. Ideally, you should try not to touch the frame, since a wet frame becomes problematic afterwards, causing streaking when you’re squeegeeing the windows. 

4. Wash the rest of the glass panes. You can use a circular motion. While this is not a rule, working in circular motions is a popular approach. You can always go with a different pattern, depending on what approach makes you comfortable. 

5. Use enough cleaning solution for the window to remain wet all through the process- so that it doesn’t dry before you get to squeegee it. 

Extra Tips When Cleaning Your Windows

It’s advisable to work on the windows during the cooler parts of the day. The goal is to ensure that the glass remains wet during the process. When it dries with the cleaning detergent having not been squeegeed off the surface, then residue will be formed. You can always add more cleaning solution if need be. Using tools like the Ettore “Taper T” T-Bar that have been designed to allow you to work faster will also aid in this, to enable you to achieve quality results. 

It’s important to squeeze out the excess water from the washer, in order to prevent dripping- especially when working on the interior side of the windows. After all, you don’t want water dripping onto your floor. Besides, the indoor side of the windows is not usually as soiled as the exterior side, hence less solution will be required when cleaning it. 

Window Cleaning Made Easier With The Ettore “Taper T” T-Bar