Chimiver Adhesiver RE 400 | Lino, Vinyl & Carpet Adhesive

Chimiver Adesiver RE 400 Plus

• Quick drying flexible adhesive compatible with a number of types of floors

• Excellent spreadability, premium workability, suitable for indoor use, cheap

• Great for fitting vinyl floors, linoleum, PVC, carpets, marmoleum floors etc

• Water based dispersion adhesive based on top quality acrylic terpolymers

• Characterized by very high dry residue, super low water content & low odour

• Highly appreciated by the professional floor fitting and floor repair trades

• The new Chimiver Adesiver RE 400 Plus will cover 30-40 sq m per bucket

• It can be applied on base surfaces with high porosity and medium porosity

• The product can also be used by DIY users to repair most types of flooring

• Highly cost effective, very reasonably priced and very highly recommended

• Sold in a 12 KG bucket | White colour | Water dilutable | Thick composition

Chimiver Adesiver RE 400 Plus | Why Use It

Gluing most types of floors besides wooden floors is the area where the new Chimiver Adesiver RE 400 Plus is at its best. A genuinely high quality adhesive compatible with most types of base surfaces and most types of floors, amazing coverage area, low cost, compliant with all EU legislation, suitable for installing new flooring or repairing floors, high workability, high flexibility and shortest drying times ever. A top of the range multi use floor adhesive from Chimiver. The new Chimiver Adesiver RE 400 Plus is used by thousands of professionals all over the planet and by millions of residential users as well. To be applied with a notched trowel over a flat and medium absorbent base surface.

Chimiver Adesiver RE 400 Plus | Where To Use It

The new Chimiver Adesiver RE 400 Plus is compatible with pretty much any type of subfloor surface that has medium to low absorbency, is clean, as flat as possible and dry. It can be used to install vinyl floors, lino floors, carpet tiles, PVC floors, marmoleum floors and generally all kinds of plastic and laminate flooring. The product is compatible with concrete subfloors (polished or unpolished), screed, plywood, pre-existing wooden floors, pre-existing tile floors and other materials. Outstanding versatility, workability and efficiency. One of the most popular floor adhesives from the Chimiver range. Suitable for all kinds of indoor floor installation projects.

Chimiver Adesiver RE 400 Plus | How To Use It

Prepare the surface to make sure that the surface is as flat as possible, as clean as possible and dry. Surfaces that are very uneven or full of holes, should be grinded and leveled up with a quality screed. Use a notched trowel to spread the glue all over the floor. The product will cover 30 to 40 sq meters per bucket but it can vary dramatically based on the condition of the subfloor and the type of floor that is being installed. 

1. Vacuum the surface well and make sure that the subfloor is debris free and dry.

2. Mix up the new Chimiver Adesiver RE 400 Plus until a uniform composition is achieved.

3. Apply an even coat of the new Chimiver Adesiver RE 400 Plus with a notched trowel.

4. Wait about 5 minutes after the adhesive was spread and then install the floor over it.

5. If happy with the way the floor looks, apply some pressure with a suitable roller to properly attach the floor to the ground.

6. Do not walk on the floor for at least 10 hours after the initial installation.

7. Clean all tools and equipment before the adhesive manages to dry.

Chimiver Adesiver RE 400 Plus | Recommendations

The recommended dilution rate is informative only. The product should only be used on fully dry floor surfaces. Do not mix up the new Chimiver Adesiver RE 400 Plus with any other adhesives to avoid unwanted reactions. Do not use the new Chimiver Adesiver RE 400 Plus to install tiles or wooden floors. Do not use the new Chimiver Adesiver RE 400 Plus for outdoors floor installations. Store the product away from direct sunlight and out of reach of children.

Chimiver Adesiver RE 400 Plus