Chimiver Prymaren Acrylic Primer For Microcements

Chimiver Prymaren Acrylic Primer For Microcements

• Insulating single component primer for all types of unsealed microcement surfaces

• It fully penetrates the surface and it creates a perfect base for all further applications

• A non yellowing formula | It will cover up to 50 sq meters per 5L bottle but it can vary

• The product will reduce the sealer absorption and it will increase the surface durability

• It can be applied over a dust free surface, debris free surface and 100% dry surface

• Highly recommended for sealing non industrial or residential concrete & microcement

• Estimated drying time 2-3 hours | Recoatable after about 4 hours | 24 H curing times

• The product can be diluted 10%-20% with clean water | To be applied in 1 or 2 coats

• Compatible with all concrete floors, microcement surfaces & concrete agglomerates

• Water based sealer | It can be overcoated with all Chimiver microcement floor sealers

• The product is designed for intense residential use, office floors, showrooms, galleries

Chimiver Prymaren Acrylic Primer For Microcements | Why Use It

The use of all kinds of primers is highly recommended. Most primers are usually cheaper than the sealers and it can really help create better finishes, reduce the absorption of protectors and provide much longer lasting results. The new Chimiver Prymaren Acrylic Primer For Microcements is a professional quality microcement primer that fully penetrates all kinds of highly absorbent surfaces and it creates a barrier between the floor and the sealer. Applying a finishing product to a porose microcement surface without a primer can end up costing you 50% more than it should. The new Chimiver Prymaren Acrylic Primer For Microcements is one of the most cost effective and high coverage microcement floor primers ever.

Chimiver Prymaren Acrylic Primer For Microcements | Where To Use It

Use the amazing Chimiver Prymaren Acrylic Primer For Microcements to prime all kinds of unsealed concrete surfaces, cement based tiles and walls, all kinds of microcement surfaces and other highly absorbent materials. The new Chimiver Prymaren Acrylic Primer For Microcements can be used to prime and protect indoor and outdoor surfaces. It can be successfully used on floors, walls, beams, statues, etc. It fully penetrates the surface and it creates an amazing barrier that prevents further coatings from sinking deep into the surface.

Chimiver Prymaren Acrylic Primer For Microcements | How To Use It

The surface has to be as flat as possible, dust free and dry. The product can be diluted up to 20% in clean water for the first coat. It can be applied with a varnishing roll, a large brush, a sponge or whatever applications are more suitable for the project. The product has to be spread evenly to make sure that the whole surface is touched. The second coat of the new Chimiver Prymaren Acrylic Primer For Microcements can be applied  within 3 hours but it depends on the type of surface, the porosity levels and the outside temperature. The sealer can be applied within 3 hours after the primer has been applied. The product does not yellow, is fume free and it complies with all EU legislation.

Chimiver Prymaren Acrylic Primer For Microcements | Recommendations

Do not apply the new Chimiver Prymaren Acrylic Primer For Microcements over dirty, dusty or wet surfaces. Do not apply the primer over already sealed surfaces. Do not over dilute the product. Store the product in a safe place away from direct sunlight. Do not mix up the new Chimiver Prymaren Acrylic Primer For Microcements with any other microcement primers from the Chimiver range and other brands. Do not apply the product on areas that are exposed to direct sunlight or high temperatures. 

Chimiver Prymaren Acrylic Primer For Microcements