Chimiver Self Expanding Adhesive

Chimiver Self Expanding Adhesive

• Innovative self expanding adhesive suitable for filling hollow gaps and repairing floors

• It can be used for re-gluing loose parquet pieces, filling up hollow gaps & sound proofing

• A product that is very easy to use and will fully dry within a matter minutes | Low cost

• It is compatible with all types of wood floors regardless of what type of base material

• The product fills up hollow gaps to reduce hollow noises & attaches loose floorboards

• There is no need to use expensive equipment, no need for training & it is cheap to do it

• The product reacts with the air and expands in a matter of minutes | Fume free

• A tiny amount of the new Chimiver Self Expanding Adhesive will fill up a monster gap

• The best solution to sort out loose floorboards and cancel hollow gaps

• Loved by all professionals and adored by DIY users because of its amazing results

• 0.5 L size | Light brown colour | Expanding foam with great flexibility & high adhesion

Chimiver Self Expanding Adhesive | Why Use It

All wooden floors are likely to start moving after a few years or in some cases from the first day. Errors from the installation process, too much humidity, unsuitable adhesives, etc. All these can “help” create hollow gaps or enable parts of the floor to loosen up and move around. The situation can be very annoying and very expensive to fix if a professional contractor is hired to deal with the issue. But now there is a way of doing it on your own without paying out a lot of money or having to use fancy equipment. The new Chimiver Self Expanding Adhesive is a god send for people like you and this product is guaranteed to work. In a matter of minutes there will be no more hollow gaps and the floor will be firmly attached to the ground.

Chimiver Self Expanding Adhesive | Where To Use It

Dealing with hollow gaps or loose floorboards used to be a pretty expensive and time consuming operation. Lifting up the floorboards, gluing the new floorboard, waiting 24 hours to dry and then hoping for the best, used to be the way of doing it. Then the new Chimiver Self Expanding Adhesive was invented and things have changed dramatically. A quick and cost effective solution that can be used to re-attach all types of hardwood floors and semi solid wood floors to concrete, plywood, over tiles and other types of pre-existing flooring. Unlike other similar products, the new Chimiver Self Expanding Adhesive dries out in a matter of minutes and expands 10 fold. It really sticks the floor to the base surface and it fully cancels noises caused by the hollow gaps.

Chimiver Self Expanding Adhesive | How To Use It

Assess the floor and identify all the floorboards that are moving or all areas that have hollow gaps. To be able to use the new Chimiver Self Expanding Adhesive, the user will need to use a drill that is fitted with a 3-4 mm drill bit, a syringe and 500 ML of the new Chimiver Self Expanding Adhesive. Here is the step by step process which should be followed in detail:

1. Drill a small hole in the middle of the affected area or if there are large surfaces that are affected by hollow spaces or are detached, drill a few holes. 

2. Using a normal syringe, squirt some water in each hole drilled. Not a lot of water but about 1-3 ML per hole. The foaming of the new Chimiver Self Expanding Adhesive will be activated faster and in higher volume if it gets in contact with water.

3. The bottle that contains the new Chimiver Self Expanding Adhesive has a special long pin head designed to fit in a 3-4 mm hole. Cut the top of it to expose the pipe and add 1-3 ML of the new Chimiver Self Expanding Adhesive through the drilled hole.

4. Within about 5 minutes the new Chimiver Self Expanding Adhesive will start expanding and filling up the gap that exists between the floor and the wood. Within 1-3 hours it will become a flexible foam that attaches the wooden floor to the ground and also cancels the hollow noises.

5. Remove any dry excess foam that might have risen up and use one of the Chimiver`s coloured gap fillers to fill up the hole.

Chimiver Self Expanding Adhesive | Recommendations

Do not forget to wet the area before pouring the new Chimiver Self Expanding Adhesive into the hole. Do not add more than 1-3 ML of the product to avoid over-expanding and lifting up too much. Do not walk on the area while it is drying. Do not add any extra product to the composition and do not use it to fill up any other types of gaps. Any surface that is accidentally touched by the new Chimiver Self Expanding Adhesive should be cleaned quickly.

Chimiver Self Expanding Adhesive