Chimiver Wood Adhesive 327 PU Two Pack 13 KG

Chimiver Adesiver 327 PU Wood Adhesive

• Highly durable two component wood floor adhesive from Chimiver

• Suitable for laying all kinds of hardwood & engineered wood floors

• Two component polyurethane adhesive without epoxy modifications

• Low odour wood adhesive qualified as highly elastic and flexible

• It can be used for installing all types of pre-finished wooden flooring

• A quick drying, easy to use, cheap  and user friendly wood adhesive

• It can be applied on cement floors, screed, plywood, tiled surfaces

• To be applied over a clean, dust free, debris free & fully dry surface

• Highly appreciated by the professional trade and by DIY users

• Suitable for all kinds of commercial applications and also residential

• Available in 13 KG bucket that contains the hardener | Walnut colour

Chimiver Adesiver 327 PU Wood Adhesive | Why Use It

Chimiver is one of Europe`s biggest manufacturers of wood adhesives and wood care products. Chimiver offer a full range of single component and two component wood adhesives. The new Chimiver Adesiver 327 PU Wood Adhesive is a two component wood adhesive suitable for installing all kinds of pre-finished hardwood and engineered wooden floors on all kinds of surfaces. The product has a very low odour, great coverage area and it dries in no time. The product is suitable for installing high traffic residential and commercial floors where there is a lot of bouncing and a lot of traffic. The adhesive is very user friendly and it can be cleaned easily from the wood top. 

Chimiver Adesiver 327 PU Wood Adhesive | Where To Use It

Chimiver has been manufacturing top of the range wood adhesives for the past 60 years. Every few years, the range is changing, improving, becoming greener and much more environmentally friendly. The new Chimiver Adesiver 327 PU Wood Adhesive is one of the most popular wood adhesives in Europe. This product is suitable for installing all kinds of hardwood and semi solid wood floors on a concrete base, screed base, plywood base, over-prexisting tiled surfaces, on vertical surfaces and others. The product is suitable for indoor wood floor installations only.

Chimiver Adesiver 327 PU Wood Adhesive | How To Use It

The product is sold with a bucket of adhesive and hardener. Before proceeding with the wood floor installation, the adhesive and the hardener have to be mixed together until the mixture becomes a smooth cream. Only mix what you might need for the project you are undertaking. The adhesive will harden up inside the bucket within a few hours after the hardener was added to the mixture. Then start with the surface preparation. Remove all visible debris, vacuum the floor to get rid of all kinds of fine dust particles and make sure that the surface is fully dry. To be able to lay floors, the user will need to use a notched trowel. 

1. Apply a thin and uniform coat of the Chimiver Adesiver 327 PU Wood Adhesive.

2. Make sure that there is no excess glue in one area and less in the other areas.

3. Lay the floors on the top of the adhesive making sure to do install it as flat as you can.

4. Any adhesive that was dropped accidentally on the floor should be wiped off. 

5. Clean all your tools and make sure not to walk on the floor for at least 24 hours.

Chimiver Adesiver 327 PU Wood Adhesive | Recommendations

Do not use the new Chimiver Adhesive 327 PU Wood Adhesive over wet surfaces, dusty surfaces or surfaces that are very uneven. Surfaces with very high porosity should be sealed with a primer. Do not mix up the new Chimiver Adesiver 327 PU Wood Adhesive with any other adhesives or hardeners from other brands. Any surface that gets in direct contact with the wood adhesive should be wiped quickly with a clean cloth. Store the product out of direct sunlight and out of reach of children.

Chimiver Adesiver 327 PU Wood Adhesive