A Look At The Faber Cement Remover

Cleaning grout residue off surfaces after installing tiles is one of those laborious jobs that can quickly get exasperating if the right procedures are not used. The grout dries quickly, and the longer that the residue is left on the surface, the more difficult it gets to remove. As the residue hardens, you have a new problem to deal with: grout haze. When setting the grout, the materials used are mixed with water, creating the thick solution that is used to secure the tiles. When the excess residue dries on the source, it forms a thin semi-white film that cannot just be “wiped away”. Normal surface cleaning products will not remove it. you need a product that has been developed for dealing with grout haze – and you can get that in the Faber Cement Remover.

The grout residue is not the only thing to contend with after the construction and renovation jobs. There is also the residue that remains from adhesives, mortar and varnish. These substances cling onto the surfaces, becoming a nuisance and interfering with the quality of the results. They are not a surprise though. Such kinds of grime are expected after the construction project. Focus shifts to getting a formulation that is effective enough to break down the contents to get rid of them. The Faber Cement Remover has proven to be an asset during end-of-installation cleanup jobs. What can you expect from it? Let’s get right to it.

Effectively Do Away With Grout Residues

The Faber Cement Remover packs a punch when it comes to dealing with cement-based grout resides. It breaks them down, enabling them to be easily removed from the surfaces being worked on. That grout haze that is affecting the aesthetics of the newly set tiles is dissolved, bringing out the charm of the underlying tiles.

Those efflorescent marks on the different surfaces in the premises can also be handled with this formulation. They are formed when dissolved salts are carried by moisture to the surface of the walls and floors, and once this moisture evaporates, it leaves behind the white crystalline matter that is in stark contrast to the rest of the surrounding spaces.

All-round Inorganic Dirt Removal

The glue, mortar, varnish and other kinds of residue are all dissolved by the acidic-based Faber Cement Remover. Even the surface patina that is typically formed when the wrong cleaning agents are applied can be removed with this detergent. This sets a clean and vibrant surface, enabling you to achieve the desired aesthetic results for the installation.

Being part of the Faber Showroom line of products, the Cement Remover emphasises quality and ease of application. This acid-based detergent has been formulated to be applied with the traditional cleaning equipment. You can use a cloth, mop, or brush for the DIY enthusiasts cleaning at home or even a single disc machine for those carrying out the cleaning on large floors such as in commercial spaces.

Cost savings also come into focus. After all, post-installation cleanup can get expensive, with all the formulation and equipment that are used for the task. You want to minimize the amount of expenses that go into it, and the affordable price of the Faber Cement Remover plays a role in this. You can get it in 1L bottles, or the larger 5L and 10L cans, depending on how much construction residue needs to be got rid of, and the size of the area that you’re working on. The concentrated detergent also features a 10-15m² per litre application rate, where the specific rate for your installation will depend on how it is diluted.

How To Use The Faber Cement Remover

A few issues to note before the application:

You should give recently laid or grouted surfaces at least two days for them to cure before using the Faber Cement Remover on them.
The surface being treated should be completely dry.
Ensure that surrounding areas that are not to be treated have been covered to protect them from accidental splashes.
A spot test on a small, hidden area is recommended.

Once ready, proceed with these steps:

1. Prepare a solution of the Faber Cement Remover and water in a bucket. For this, mix it with clean water using a 1:2 ratio.

2. Work this solution over the surface, scrubbing it in thoroughly with the preferred tool.

3. Give it 5 to 10 minutes to act on the infused dirt residue. Here, the Faber Cement Remover will do the heavy lifting, chemically breaking down the residue. You can further aid this process by wiping over the area with the cleaning tool. Clear away the residue, then rinse the entire floor. If some spots remain, then you can repeat the process – this time with less dilution.

The area will be ready to handle normal traffic after the washing. No further drying time is needed. When it comes to subsequent maintenance processes, the brand has provided formulations that will enable you to retain that clean result you have obtained with the Faber Cement Remover. For this, go with the formulation that is compatible with the particular kind of surface in question. Examples of popular products include Faber Neutral Cleaner and Floor Cleaner.

Definitely, taking measures to minimize aspects like grout haze during the installation will reduce the inconveniences caused. You can do this by wiping the tiles immediately after the grout has dried – but not so hard that you end up pulling the grout out of the joints. As you carry out the grouting, ensure that you remove as much of the excess grout as possible using the rubber float that you’re using to work with. This can be done with the edge of the rubber float, where you simply clear the unwanted grout away from the tiles. A tile sponge can also come in handy to wipe off the grout residue whilst you continue with the installation. Taking such steps will decrease the haze that appears later on after the installation dries. With the Faber Cement Remover in your cleaning arsenal, any residue that remains will still be firmly dealt with at the end of the installation process.

A Look At The Faber Cement Remover