Superior Aesthetics With The Faber Enhancer Plus

In matters of surface care, aesthetics are critical. From natural stone installation to their agglomerates, you want them to radiate elegance. These installations come with their different colourations and tones, as well as aspects like veining which add to the uniqueness. Additional aspects like polishing add to the shine of the surface, reflecting the natural light and making the room look brighter. All this ties together to impact the decor. However, threats still remain – from dirt and stains to the daily wear and tear that can quickly erode the charm of your installation. Protective agents are needed that will enhance the prominent features of the installation, while still protecting it from the barrage of abuse that it comes under every day. You can get that with the Faber Enhancer Plus.

Sprucing Up The Beauty Of Your Surfaces

This solvent-based formulation stands out for its colour-enhancing properties, making the features of the treatment surface more prominent – as you can tell from its name. The Faber Enhancer Plus penetrates and bonds with the surface, setting a matt finish without forming a film on the area. It creates a lasting effect, and it also doesn’t yellow over time – which is usually one of the concerns when it comes to solvent-based products. This won’t trouble you here, and you get to ensure that the elegance of your installation lasts for long.

When applying the Faber Enhancer Plus on the surface, ensure that you achieve a thick, uniform layer that covers the whole area. You can wait for around minutes after the coat has been applied before redistributing the product on sections where you notice there is build-up. Ensure that the surface is thoroughly cleaned before using the Faber Enhancer Plus on it. This is to avoid a case where dirt and other particulate matter get trapped under the wet coat, bonding with the finish and becoming part of the final result.

Note that the formulation should only be applied onto a dry surface.
If a water-repellent primer had been applied to the area, allow it to first cure before using this solvent-based product on the area.

With Faber, you’re relying on a brand that has proven its commitment to quality products and formulations. From its conception in Italy in 1986, the company has become a household name across the different continents. It specialises in the development of surface care products for both natural stone and manmade building materials. This includes abrasives and polishes that bring the shine to surfaces; protective products that ward off stains while increasing the breathability of the treated material – and even those that combine protective attributes and aesthetic features such as the Faber Enhancer Plus under review here; cleaning agents that break down those heavy dirt build-ups and stubborn spots, stain removers that tackle these frustrating stains without putting the structural integrity of the installation at risk; all through to products that are used in repair tasks, such as mastic and epoxy systems. Its quality systems have actually achieved ISO:9001:2015 certification, issued by the certifying body Certiquality. The popularity of the brand has seen it spread its market all over Europe in nations like France, England, Poland and Greece, the emerging markets in the Middle East, to far-flung nations in Asia, including Singapore, China, Thailand and the Philippines.

Daily Protection

Then there is the factor of greasy grime and stains. If these set into the surface, they take away the beauty of the installation. Those patches of stains stick out like a sore thumb, interfering with the decor that you have worked so hard to set up. You won’t have to worry about that with the Faber Enhancer Plus. It comes with hydro- and oleo-phobic properties. Basically, the formulation repels water and oils fro staining agents that would have otherwise ended up bonding with the surface. This makes routine maintenance easier, reducing the time and resources that would have been taken up by the process.

For the routine cleaning of surfaces treated with the Faber Enhancer Plus, you can work with formulations such as the Faber Floor cleaner or Neutral Cleaner. These products from the same brand each come with their target areas of application, and your choice will depend on the particular type of surface that you’re dealing with.

Suitable for A Wide Range Of Surfaces

The water-repellent nature of the formulation allows it to be used to treat surfaces in areas like showers and fountains, which are environments where there is plenty of contact with water. Moreover, since it is resistant to UV radiation and the weather elements, it can be applied to outdoor surfaces. The formulation has been particularly developed for application on low-absorbent installations or surfaces with a polished finish. These include granite, limestone, travertine, porphyry, marble-resin and other agglomerates, all through to slate and molten basalt surfaces. Note that it is always recommended that you first undertake a preliminary test on your particular installation before using any surface care product on it, to assess the impact of the formulation that you intend to use.

The Faber Enhancer Plus is also safe for use on food-contact surfaces. This means you can use the formulation to accentuate your kitchen countertops, enhancing their aesthetic appeal and protecting them from staining and water damage, all without putting the integrity of the foods prepared on these surfaces at risk.

Fast drying agent

This is particularly handy in minimising disruptions to activities in the premises. Surfaces that have been treated with the Faber Enhancer Plus will dry within 1-2 hours after application. If a second coat of application is needed, such as when you’re dealing with absorbent surfaces, then this can be done after the 2-hour drying time has elapsed.

Some issues to note:

While the treatment will dry quickly, allow for at least 6 hours to pass before letting normal foot traffic back onto the area.
Normal washing should wait for at least 24 hours after treatment, or even as much as 48 hours, buying the formulation time to bond firmly to the installation.

Superior Aesthetics With The Faber Enhancer Plus