Chimiver ECOPRIME HS 120 | 2K Wood Primer | Clear
Chimiver ECOPRIME HS 120 | Clear Acrylic Two Pack Floor Primer
Two pack, colour free water based wood floor primer from Chimiver
It fully seals the wood, it fills up sanding imperfections, fills up pores
It creates a perfect smooth finish without an artificial overglazing
The primer can be overcoated with any water based floor lacquer
No fumes, non yellowing, eco-friendly, easy to use and quick drying
It will cover around 10 sq meters per 1L but it can vary dramatically
Highly recommended for the professional floor refinishing industry
The primer is sold in a 5L bottle plus 1L bottle of solvent hardener
If fully seals the surface in 1 coat only plus one coat of floor lacquer
It speeds up the floor refinishing project while reducing the costs
The estimated drying time for this wood primer is around 2 hours
Chimiver ECOPRIME HS 120 | Clear Acrylic Two Pack Floor Primer | Why Use It
Not using a primer before varnishing can cost the user extra because the surface will absorb much more lacquer than needed and it will deposit it deep inside the wood, it will increase the drying periods dramatically because the lacquer will get very deep inside the wood and the final result might not be as smooth. The new Chimiver ECOPRIME HS 120 | Clear Acrylic Two Pack Floor Primer is unlike any other wood floor primer out there. This two pack water based floor primer was specially designed for the wood floor refinishing trade to enable them to work faster, cheaper and more efficiently. One coat of the new Chimiver EVOPRIME HS 120 | Clear Acrylic Two Pack Floor Primer + 1 coat of the Chimiver Ecostar 2K Floor Lacquer has fully completed the refinishing process.
Less lacquer needed for the same project
Smoother finish guaranteed
2 coats refinishing process
Fume free water based primer
100% natural looking sealer
Chimiver ECOPRIME HS 120 | Clear Acrylic Two Pack Floor Primer| Where To Use It
Due to its high solid content and due to the fact that this product is a “two” pack floor primer, it is mostly suitable for sealing and protecting hardwood floors. It can be used as the main sealer for any unsealed wood surfaces. For the primer to fully work and do its magic, the wood surface has to be new or newly sanded. The primer has to fully penetrate the wood surface. Another great advantage is the fact that all in, the user will receive 6L of primer that can and will cover around 60 sq meter of wood assuming that the wood was refinished with 100-120 grit sanding paper.
Chimiver ECOPRIME HS 120 | Clear Acrylic Two Pack Floor Primer | How To Use
Surface preparation is essential so the user has to start by sanding the surface with all the sanding grits up to about 120 grit. Even brand new wood surfaces might require a light sanding before being primed.
Mix up the wood primer with the hardener, do not just throw in the hardener and hopefully it will work. In a varnishing bucket add the primer. Then while stirring slowly, apply the hardener to the composition. Do not mix more than needed for one application because from the moment the hardener is mixed up with the wood primer, the user has 2-4 hours to use it otherwise it will harden up inside the bucket.
Using a small varnishing brush apply a thick coat of wood primer around the edges and all to reach areas. Do not over soak the wood but remember to make sure that the whole surface is evenly wet.
For the larger floor areas use a professional varnishing roller. While moving along with the fiber of the wood and not against it, apply one thick and even coat of wood primer all over the floor.
Wait for the primer to dry. The actual drying time can increase or decrease dramatically based on the ventilation, temperature and the way the wood primer was applied. You need to hand touch the surface to make sure that it is fully dry before proceeding to the next steps.
Re-sand the whole surface one more time with fine quality 180 grit sanding discs or sanding screens. Vacuum well and apply 1 coat of two pack floor lacquer or two coats of a single pack floor lacquer. The job is completed.
Chimiver ECOPRIME HS 120 | Clear Acrylic Two Pack Floor Primer | Recommendation
Do not use the new Chimiver ECOPRIME HS 120 | Clear Acrylic Two Pack Floor Primer on wet, sealed or dirty surfaces. This is a clear wood primer and any imperfection that has existed prior to the application, will be still there after the application. Make sure to mix up the wood primer with the hardener before applying. Do not walk on the surface while wet. Do not mix up more products than needed. Do not touch any other surfaces that do not require priming. Work in a well ventilated area. Keep the product away from direct sunlight and children.
When you order from cleanfast.ie, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!