Chimiver ECOPRIME HS 120 CROM | Solvent Effect Primer

• A quick drying two pack water based wood floor primer with a darkening effect

• Compatible with all types of new or newly sanded hardwood & semi solid floors

• It speeds up the whole refinishing process and it creates a rich and cozy finish

• The whole refinishing process will require 1 coat of primer and 1 coat of lacquer

• It seals the wood pores, it repairs small imperfections and it reduces the costs

• Highly recommended for use by the professional wood floor refinishing industry

• It can be used to create warmer finishes on white wood or to blend in finishes

• Sold in a 5 L bottle | Estimated coverage area : 10 sq m per 1 L | 2 h drying time

• It can be overcoated with a single pack or a two pack water based floor varnish

• To be applied with a varnishing brush, a varnishing roller or a lacquer applicator

Chimiver ECOPRIME HS 120 CROM | Solvent Effect Primer | Why Use It

The point of this product is to enhance the wood and to create a darker finish while sealing the surface. While most single pack wood primers will require 2 extra coats of lacquer over the primer, the new Chimiver ECOPRIME HS 120 CROM | Solvent Effect Primer will only require 1 coat of two pack floor lacquer to have the whole wood floor refinishing process completed. It dries in a matter of minutes, it is easy to apply and it creates an amazingly smooth finish on the wood surface.

Chimiver ECOPRIME HS 120 CROM | Solvent Effect Primer | Where To Use

Such a strong water based floor primer should only be used on wood floors. It can be used to seal and enhance all types of real wood floors but it will only be visible when used on bright types of wood floors. The new Chimiver ECOPRIME HS 120 CROM | Solvent Effect Primer is suitable for all kinds of indoor use only. It can be used on any type of wood surface that is sealant free, dry and spotless. One coat of wood primer is more than enough to have the wood prepared for the final application. The hardener that comes with this wood primer transforms an already great wood prime into an excellent wood primer. 

Chimiver ECOPRIME HS 120 CROM | Solvent Effect Primer | How To Use It

If the wood surface is sealant free, clean and residue free, the user can prepare for application. Bear in mind that the estimated coverage area of 10 sq meters per 1L of wood floor primer is estimated only. The actual coverage area will depend on the type of wood and the way it was sanded. 

1. Start by mixing the wood primer with the hardener and do not touch it for about 10 minutes. 

2. Using a small varnishing brush, apply one thick coat of wood primer around the edges and all the hard to reach areas. For the larger areas use a good varnishing roller like the amazing Chimiver Varnishing Roller.

3. Do not walk on the surface for at least 1-2 hours. The better the ventilation the faster the drying times.

4. The whole surface will have to be sanded 1 more time with 180 to 220 grit sanding paper to remove all the imperfections and to create a perfectly smooth finish.

5. Vacuum well and prepare for applying 1 coat of Chimiver Ecostar 2K Floor Lacquer.

Chimiver ECOPRIME HS 120 CROM | Solvent Effect Primer | Recommendation

Do not mix up the product with any other type of wood primer. Do not soak the wood. Do not walk on the surface until it is touch dry. Do not apply more than 2 coats of water based floor lacquer. Do not sand the surface until it is 100% dry. Do not apply more than 1 coat of wood primer. Keep the product away from children and store in a cool and safe place away from direct sunlight.

Chimiver ECOPRIME HS 120 CROM | Solvent Effect Primer