Junckers Anthtacite Grey Wood Stain 2.5L

Product Description

Junckers Anthtacite Grey Wood Stains

-premium universal wood stain from Junckers

-suitable to use on floors and all types of wood surfaces

-to be applied on new or newly sanded surfaces only

-coatable with any of Junckers water based lacquers

-unique look, premium coverage, fast drying, rich

-it will cover around 50 sq meter per L of wood stain

Junckers Anthtacite Grey Wood Stain - Where to use

This professional wood stain can only be applied over new or newly sanded wood surfaces. It can be used to seal and change the look of old furniture, new furniture, hardwood floors, semi solid floors, engineered wood floors, handles, frames, etc. One coat of Junckers Wood Stain will create a dark grey-stone finish on brighter types of wood. One 1 coat of Junckers Wood Stain will create a very dark finish on darker types of wood surfaces, like oak or walnut. You can apply one coat or two coats, depending on the level of richness you plan to achieve. To be sealed with any of the water based or solvent based lacquers from Junckers. If you are planning to use a different brand of varnish or lacquer, make sure that you use a two pack water based sealant or a solvent finish. All Junckers wood stains are oil based.

Junckers Anthtacite Grey Wood Stain - How to use

Sand the area to remove any pre-existing finishes from the wood. If you are planning to stain small areas or furniture, just use a cloth. Soak the cloth in wood stain and then rub it against the wood fibre until the wood has absorbed it in full. Do not overuse the stain. About 1 hour later the surfaces should be dry. If you are not fully satisfied with the finish, you can apply a second coat. The drying time can vary from day to day and surface to surface. When staining big floor areas you can use a floor buffer and a white pad to stain evenly. The trick is to give the wood enough stain to look cool without overdoing it.

Junckers Anthtacite Grey Wood Stain - Advice

Always wear gloves to avoid staining your skin. Avoid splashing the stain over other areas and clean spillages fast. When staining wood floors, use a cloth to stain the areas around the skirting. After the surface is stained, do not walk on it for 1-2 hours. When the surface looks dry, apply two coats of floor lacquer from Junckers with a 2 hour break between coats. Amazing results guaranteed.

Junckers Anthtacite Grey Wood Stain

Write a review

Note: HTML is not translated!
    Bad           Good

When you order from cleanfast.ie, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!