Njord Hammer Alkaline Pre-Spray 6L
Product Description
Njord Hammer Alkaline Pre-Spray
The most widely used and highly rated pre-spray from the Njord range
A professional pre-spray for those hopeless looking carpets | sofas
PH 12 | Highly concentrated | Slightly alkaline | Pleasantly perfumed
It can be used as a pre-spray, a spot remover or as a rinse detergent
It will emulsify heavy soiling, grease, food stains, organic based stains
To be diluted 30 ML per 1L of clean water when used as a pre-spray
To be diluted 250 ML per 1 L of clean water when used as a spotter
It can be safely used on all carpets, most sofas & rugs | Wool safe 100%
Highly cost effective because it combines three different operations
It reduces the amount of time needed to achieve professional results
Highly popular with the professional carpet and sofa cleaning industry
Njord Hammer Alkaline Pre-Spray | Why Use It
Any professional carpet cleaning or sofa cleaning contractor can tell you how easy it is to remove stains and achieve great results if you are using a proper pre-spray detergent. The amazing Njord Hammer Alkaline Pre-Spray was created by a team of professionals that have been deep cleaning carpets for years and have dealt with some of the worst and hardest to remove stains. This amazing product contains all the ingredients needed to give you a fair chance while tackling bad stains and discolorations on carpets, sofas and other types of washable fibers. Even if the new Njord Hammer Alkaline Pre-Spray has a PH of over 12, it is 100% wool safe.
Njord Hammer Alkaline Pre-Spray | Where To Use
This is a top of the range professional pre-spray and carpet stain remover from Njord. The product was designed with the professional carpet cleaning trade in mind and is made to deal with all kinds of stains fast without negatively affecting the base surface. The new Njord Hammer Alkaline Pre-Spray can be safely used on all types of carpets including wool, all types of sofas, all types of upholstery, all types of rugs, all types of mattresses, all types of curtains, chairs, car seats, pet beds and other surfaces. It starts working within seconds and the final results will impress even the most demanding customers.
Njord Hammer Alkaline Pre-Spray | How To Use
You can use the amazing Njord Hammer Alkaline Pre-Spray as a general pre-spray to emulsify and soften most types of dirt or it can be used as a spotter. With a dilution of about 30 ML per 1 L of warm water it can be used to pre-spray most types of surfaces and prepare it for the extraction or with a dilution of 150 ML per 1 L of clean water it can be used as a spot remover or stain remover.
Pre-Spray | Use a pressure pump to mix up the product and apply a fine mix of the product all over the surface. Allow direct contact for at least 10 minutes to make sure that the product has reacted with the stain and then lightly scrub the visible dirt patches. Now wash the surface as usual.
Spotter | Dilute 150 ML of the new Njord Hammer Alkaline Pre-Spray in 1L of clean water and apply it to the stains. Make sure to vacuum the surface to remove as much dust or residue as possible and only then apply the treatment. Again, do not scrub for at least 10 minutes after the initial application. Then wash the surface as usual.
Njord Hammer Alkaline Pre-Spray | Recommendation
It is essential to allow time for the product to work. Do not spray and extract. Dilute the product to the recommended dilution rate and don`t forget to extract the waste. For your peace of mind you should do a small patch test for compatibility before applying the product to a larger area. Store the product away from direct sunlight and out of reaech of children.
When you order from cleanfast.ie, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!