Surface Maintenance With The Faber Quartz Cleaner

Quartz worktops and similar installations are usually much less of a fuss to maintain compared to alternatives like granite and marble. This is especially due to their high stain and scratch resistance. Quartz is non-porous, meaning that liquid spills on it won’t be readily absorbed, as is usually the case with other natural stone installations. However, the liquids should still be wiped away after spills. As time progresses there will bound to be some content that ends up beneath the surface where it can’t easily be wiped off, calling for a cleaning agent that can penetrate into the material and dissolve the dirt and stains. For this, you want to work with a tough-acting agent that firmly gets rid of the unwanted content on the surfaces, but at the same time being gentle on the material. The Faber Quartz Cleaner under review has been specially formulated for use on these kinds of installations, to get rid of the grime without putting it at risk.

Powerful Cleaning Action

The water-based Faber Quartz Cleaner penetrates into the pores and texture of the material, dissolving the dirt and stains that have accumulated over time. This includes the stubborn residue that has even changed the original appearance of the installation. That way, you get to restore the beauty to your countertops, walls and other installations, preserving the decor of the space.

The Faber Quartz Cleaner can also be used to rectify errors made from improper measures being undertaken during the routine maintenance of the surfaces. For instance, one common issue for DIY projects is the use of incompatible cleaning agents, which leave behind surface patinas. These patinas can be cleared with the Faber Quartz Cleaner, including those that are caused by grout and seals. In such scenarios, the formulation is used undiluted.

Safe Cleaning

The selection of cleaning products for quartz countertops walls and other surfaces needs to put into consideration the pH of the formulation. Solutions like vinegar, lemon or ammonia can do extensive harm to the structure. Even bleach is a threat to it, as well as conventional tile and grout cleaners. Your goal is to get rid of the dirt and stains, not end up ruining your surfaces in the process. You want to work with a formulation that is compatible to the particular surface in question, effective enough to deal with the dirt and grime, while being gentle on the underlying material to preserve its aesthetic and structural features.

With the Faber Quartz Cleaner, you will not have to worry about the installation getting damaged. It has been formulated for quartz surfaces and their agglomerates, enabling you to get rid of the dirt and grime without posing a threat to the structural integrity of the material. Given the slightly acidic nature of the product, it is only recommended for use on materials that are not acid-sensitive. If you’re not sure if the formulation is suitable for your particular type of installation, you can conduct a test on a small, hidden section of the surface, or unused tile. Observe the impact of the product on the material, before proceeding to use it on the rest of the surface.

Follow this procedure for the cleaning:

Dilution

The Faber Quartz Cleaner comes concentrated, and needs to be diluted before use. Here it will depend on how stubborn the dirt is that you want to remove. Usually, 1 part of the product can be mixed with 3 or 2 parts of water, with the latter being for the more troublesome spots.

Note that when you’re using the Faber Quartz Cleaner to deal with very stubborn dirt, remove grout or seal residue, or even in cases where you’re dealing with surface patina, the product can be used undiluted.

Application

You can use a cloth, mop or single disc machine for the application. This conventional equipment will get the task done – just remember to wear the appropriate safety gear, especially for the gloves. Also ensure that the area is well ventilated.

Work the product onto the surface with the tool you’re using, give it 10- 20 minutes to dissolve the grime, then clear away the residue and rinse the surface.

Note that the Faber Quartz Cleaner should not be mixed with any other chemical.
The equipment used for the application can be cleaned with water.

Protect your Quartz Installations

You want to see the countertops and other installations last for long. The low-maintenance nature of the material, coupled with its durability, plays a key role in this. Moreover, with its non-porous nature, it doesn’t require sealing – but ignoring the routine care and maintenance procedures will put its structural integrity at risk. With the Faber Quartz Cleaner, you will be able to deal with the grime that builds up over time, and keep the installation in optimal condition.

Here are extra tips to get more from the Faber Quartz Cleaner:

The area being worked on should first be vacuumed or swept. Getting rid of the dust and coarse debris from the surface allows the cleaning action of the formulation to focus on the stubborn residue that’s on the target area.
Ensure that the surface being worked on is completely dry before you commence the cleaning. This is because the Faber Quartz Cleaner should not be applied on wet surfaces.

Some additional measures need to be considered during the day-to-day activities. For instance, one popular place for quartz installations is the kitchen countertop. Things get busy here, and the durable nature of the tiles enables them to withstand the chops and cuts that are seen during the food preparation activities. However, avoid actions like placing hot plates and pans directly on it. The thermal expansion that results can cause the material to crack.

Also do not ignore any spills. The stain resistance of the material is not a green light to allow drink spills to remain on the surface for long. Wipe them off as soon as possible to protect the underlying surface.

Surface Maintenance With The Faber Quartz Cleaner