Faber No Mac Gel

Product Description

Faber No Mac Gel | 500 ML


-professional powerful stain remover from Faber

-to be used on marble, treavertine, limestone, etc

-it will remove tea, coffee, wine, ink, algae, mould

-to be used on floors and vertical surfaces (walls)

-it will not alter the surface & it works very fast

- a proper marble multi stain remover from Faber

Faber No Mac Gel Review

Stains are bound to happen. No matter how careful one is on a daily basis, a simple slip-up can result in a mess that creates an unsightly spot on your floors or worktops. From the coffee cup that was accidentally knocked over, some wine sloshed over the edge of the glass and winded up on the floor- these form stains that are hard to ignore. Inkblots from faulty pens, those cases when the children decide to showcase their artistry skills by making drawings on the walls using the marker pens, the result in the decor being ruined. Tea, fruit, tobacco, ketchup, food smudges, leaves, bark, clippings and even grass stains- they come from various sources, affecting the appeal of your installation. Certainly, you don’t want to live or work in an environment where you’re surrounded by these spots. They will distract you, preventing you from focussing on your daily tasks. Then there is the embarrassment that comes when visitors dropping by to say hi start asking about the state of affairs. Conventional cleaners developed to remove dirt and grime usually leave these spots behind. As such, stain removers like the Faber No Mac Gel are a core part of the cleaning process.

Faber, the brand, has been around since the 80s. It is world renowned, providing quality surface care solutions developed to meet the various consumer needs. From protective formulations to keep it safe from the rising damp that's within the building’s structure, sealants that retain the breathability of the material, cleaners for daily cleaning operations and those that are specially formulated to tackle heavy build-ups of grime, honing and finishing products that enhance the natural beauty of the installation and add a touch of class to the interior space, water repellents that even enhance the non-slip properties of the surface, all through to mastics and epoxy systems that come in when you’re dealing with cracks and chips on the stone structure , plus when you want to fill the grout widths between the sheets and tiles. The wide range of products caters to the different stages of surface care- be it installation, routine cleaning, or repair and maintenance. It has also achieved certifications such as the ISO 9001:2008 with regards to quality and the ISO 14001:2004 for its environmentally sustainable systems. As such, when you turn to the Faber No Mac Gel, you can be sure that you're getting quality from a company that has been trusted and proven to deliver on its mandate.

Benefits Of The Faber Mar Gel Plus

  1. Superior stain removal power

This water-based formulation extracts those coloured stains that are ruining your installation. From food and beverage spills, including tea, coffee and wine stains, the ink blots in the office, of algae growths that are spreading across the surface, stains from leaves and grass- the Faber No Mac Gel will get rid of them all. It does this without requiring to be mixed with other agents, chemically dissolving the stains with ease.

  1. Versatile

This stain remover can be used on any type of surface, both indoors and outdoors, on marble-cement, marble-resin, and quartz-resin agglomerates, limestone and marble itself, slate, basaltina - lava stone, sandstone, cementine, concrete, molten basalt, both craquelé and ceramics, clinker, cotto, quartzite, granite, porcelain stoneware, reconstituted stone (eco stone), travertine, tuff, porphyry, terracotta. It can even be used on cement grout and exposed brick. When working with the really absorbent surfaces- the likes of untreated natural stone, first wet the surface with a little water before you apply the Faber No Mac Gel. This is to prevent too much of the product from getting absorbed by the material. In addition, should you be unsure of the compatibility of the product with your particular material, it is recommended that you carry out a spot test on an inconspicuous area before the treatment.

  1. Easy to use

The Faber No Mac Gel drastically reduces your workload. All you need to do is apply it onto the surface and allow it some time to dissolve the stain. Different tools can be used for the application, ranging from brushes to spatulas, and you can also choose to pout it directly onto the surface. Ensure that you cover the area with a thick layer of product, especially when working with highly absorbent surfaces such as cotto and terracotta. How long should the product be allowed to stand on the surface? This depends on the level and type of staining, and how deep it had penetrated into the material. For common coffee and tea stains, wine, soft drinks and the occasional food drinks, it will take between half an hour to 2 hours. When dealing with stains from ink blots and marker, let the Faber No Mac Gel remain on the surface for 30 minutes to 3 hours. For growths like mould and algae, and the plant residue on the material, the dwelling time should be between15 minutes and an hour.

After this duration has elapsed, remove the product from the surface together with the rest of the residue. You can use cloths, absorbent paper for the small surfaces, and mops for the larger floors. Proceed to wipe the surface using a damp cloth, then let it dry. For the deeply set stains, you can improve the efficiency of the process by passing over the surface using a mechanical polisher. This action will result in more of the Faber No Mac Gel penetrating into the structure, extracting the stains within a shorter time.

  1. Gel formulation

This makes it easy to target the stained spots without the products simply flowing liberally over the area. What's more, you get to use the Faber No Mac Gel on walls and other vertical surfaces with ease.

  1. Economical

The Faber No Mac Gel enables you to save on your costs in different ways. For starters, it has an affordable price, easing the load on your budget from the word go. What’s more, since it is a tough acting formulation that doesn’t require to be mixed together with other chemicals to tackle the stains, it further cuts down on your costs.

Faber No Mac Gel

Write a review

Note: HTML is not translated!
    Bad           Good

When you order from cleanfast.ie, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!