Faber MA 90 Solvent Based Stone Sealant & Wet Look Treatment For Natural Stones
.jpeg)
Powerful protection and enhancement for natural stone surfaces. Faber MA 90 Solvent Based Stone Sealant penetrates deep into porous materials to repel water and oil, enhance colour with a wet look finish, resist sunlight, and deliver fast drying long lasting protection for indoor and outdoor stone.
(€27.20 ex. VAT)
SKU#: 020200026
Dispatch within 12 Hours: Your order will be shipped quickly.
Quality Guarantee: Professional-grade cleaning products meeting industry standards.
Click & Collect: Mon–Fri, 7 AM – 3 PM pickup available.
Bulk Order Savings: For larger quantities, call us at 1800 848 700 to get a better price.
Our customer representative is ready to help.
Call for immediate assistance at 1800 848 700
Try Our Faber MA 90 Solvent Based Stone Sealant & Wet Look Treatment For Natural Stones
- solvent based impregnator, stain proof & sealer from Faber
- sold in 1L bottles – it will cover 20-40 sq meters of surface per 1L
- suitable to use on all natural stones, paving, limestone, concrete
- it will dry in minutes and it will provide few years of protection
- to be applied over dry and clean surfaces (roller or a brush)
- it will enhance the surface and it will create a semi gloss finish
- UV rays resistant, anti slip, it will not yellow, very easy application
Faber MA 90 Solvent Based Stone Sealant | Safety Information
Suitable for professional use. Always follow the manufacturer’s instructions and safety guidelines. Suitable personal protective equipment should be used. Store in a safe place out of reach of children.
Protect Your Surfaces From Staining With The Faber MA 90
Floors, kitchen countertops, the bathroom vanity tops, all through to bar tops- these are at risk of staining due to the exposure to oils and dyes almost daily. Food and drink spills, whether it is the coffee that got knocked over during the morning rush to work, or some wine that sloshed from the glass during dinner with your significant other, cosmetic products such as the nail polish accidents that leave behind an unsightly mess, ink blots in the workspaces, all tough to greasy spots and lubricants that spill in the warehouses and garages- the stains they cause can be frustrating. Natural stones kick things up a notch due to their porous nature.
Liquids can quickly penetrate stone, leading to unsightly stains that ruin its appearance. Stain-proofing products are designed to repel spills and prevent them from bonding with the material, preserving the stone’s aesthetics. When choosing a treatment, it’s important to consider both effectiveness and the visual impact on floors, worktops, or walls. Faber’s MA 90 offers a solution for achieving desired results.
Bringing out the beauty of the natural stone
With the Faber MA 90, that characteristic veining of the stone, the colouration and grain all get enhanced. It sets an in-depth wet look that adds to the aesthetic appeal of the installation. This solvent-based product has been developed to set a semi-gloss stain finish, and is particularly suited for working on the non-polished surfaces. You can use it to treat installations that have medium to medium-high levels of absorption.
The Faber MA 90 effectively stains the surface with its water- and oil-repellent formulation, preventing spills from foods, drinks, and oils from penetrating the stone. This allows for easier cleanup and reduces the stress of maintaining the stone’s elegance, ensuring it lasts longer without panic over accidents.
Faber MA 90 is a surface finish product that resists yellowing from UV radiation, maintaining its semi-gloss satin appearance for longer, making it suitable for both indoor and outdoor use. It can be applied to various materials, including limestone, slate, cotto, granite, sandstone, marble, eco-stone, porphyry, terracotta, basaltina, and cementina. Available in 1L bottles (12 per box) and 5L cans (4 per box).
Application process
Prepare the surface by thoroughly cleaning it to remove dust, pet fur, and stains, ensuring it is dry before applying Faber MA 90. Avoid application in humid conditions, and wait for rain or mist to pass to achieve better results. Use brushes, rollers, or lambswool applicators based on your preference before proceeding with the treatment.
Apply the Faber MA 90 evenly on the worktop, floor, wall or other surfaces that you’re working on. Use an abundant amount. Give it 5-10 minutes to be absorbed into the material, then proceed to redistribute the excess product that’s on the surface. For the highly absorbent stone installations, there may not even be any excess that is left behind. The treated surface will have dried in 1-2 hours, though for floors the foot traffic should only be allowed back onto the area 4 to 6 hours after application.
For some property owners, you may desire to buff the surface after applying the Faber MA 90. This can be done 4-6 hours after the treatment. For floors, dry-brush the surface using a standard floor polisher machine, that’s set to 175 rpm. For the countertops, walls and other areas where the polisher will not be convenient, you can work with an orbital or a manual wheel.
Here are some extra tips that you should take note of in order to get the most out of the Faber MA 90:
- If you’re treating a recently primed surface, such as one where a penetrating water repellent was used, first allow it to dry before applying the stain-proofing treatment.
- Observe the prevailing environment conditions before application. In case it is about to rain, or if there is mist or fog, allow it to clear up first before proceeding to treat the surface. This is as the high humidity conditions will affect how the product bonds with the surface.
- Remember to clean the surface regularly. Avoid harsh chemicals that may react with the treatment. It’s recommended that you use units such as Faber 30, Deterfug and Neugel for the routine cleaning.
Maintaining the natural beauty of stone requires a sealant that protects without damaging the surface appearance. This high performance impregnator penetrates deep into the material to create strong resistance against stains, water, and oils. At the heart of this advanced treatment is Faber MA 90 Solvent Based Stone Sealant designed to enhance colour while producing a refined wet look finish. The easy to apply formula dries quickly and delivers durable protection for indoor and outdoor stone surfaces. Resistant to sunlight and weather exposure, it maintains a clean semi gloss appearance while protecting patios, paving, limestone, and concrete for years.
Natural stone surfaces require protection that preserves their beauty while preventing stains and moisture penetration. This professional solvent based treatment penetrates deep into porous stone to create reliable resistance against oils, water, and everyday spills. In the centre of this powerful solution is Faber MA 90 Solvent Based Stone Sealant delivering a rich wet look finish that enhances the colour and character of natural stone. The fast drying formula provides long lasting protection while remaining resistant to sunlight and outdoor exposure. Suitable for patios, paving, limestone, and concrete, it offers easy application and dependable protection that keeps stone surfaces looking vibrant and well protected.
0.0
0 Reviews
Submit Your Review
More Products From Faber Marble Care Products | Faber Products
Discover high‑quality cleaning products from the same trusted brand.
_2nd-300x300.jpeg)
_2nd-300x300.jpeg)
_4nd-300x300.jpeg)
_5nd-300x300.jpeg)
_4nd-300x300.jpeg)
_2nd-300x300.jpeg)
_2nd-300x300.jpeg)
-300x300.jpeg)
Related Products
Discover more alternatives and similar items.
We’ll email you as soon as this product is back in stock.
Faber Liquid Wax 1L | Solvent Based Marble & Natural Stone Sealant
We’ll email you as soon as this product is back in stock.
Prochem Stone Seal 5L
_2nd-300x300.jpeg)
-300x300.jpeg)
_4nd-300x300.jpeg)
_3nd-300x300.jpeg)
-300x300.jpeg)
_3nd-300x300.jpeg)
_2nd-300x300.jpeg)
-300x300.jpeg)
_2nd-300x300.jpeg)
-300x300.jpeg)
_4nd-300x300.jpeg)
_2nd-300x300.jpeg)