-top of the range domestic water based floor varnish
-suitable to use on new or newly sanded wood surfaces
-it will provide full protection against traffic for 5 years
-suitable to use on domestic and light commercial floors
-suitable for varnishing over stained wood surfaces
-5 L of varnish will cover around 50 to 70 sq m x 1 coat
-anti slip, scratch resistant, responds to buffing, low odour
Tover Home Floor Lacquer - Where to use
Tover Home Floor Lacquer is one of the most popular floor varnish in Ireland. Many local professional floor sanding companies are using this super quality water based floor varnish as their no 1 product for the domestic market. Like all Tover products, Tover Home Floor Lacquer is a beautiful natural looking product. It will dry to look wet but not very glossy. Semi gloss water based floor varnish can look shiny after the application but it will dull up about 50% after a few washes. This water based varnish is suitable to use on semi solid and solid wood floors, for sealing furniture, etc. Tover Home Floor Lacquer is an internal varnish.
Tover Home Tover Home Floor Lacquer - How to use
Sand up whatever surface you need to re-finish. Remove all the dust and make sure that the wood surface is dry. Apply a stain (if you need to) and allow time to dry. Apply the first coat of varnish and wait for at least 1 hour. Re-sand the surface again with 150 grit sandpaper to remove all the imperfections and remove all the dust. Apply two more coats of varnish with 1-2 hours breaks between coats. If a primer is required, please apply 1 primer and two coats of varnish. 5 L of Tover Home Floor Lacquer will cover around 50-70 square meter of floor x 1 coat or around 30 square meter of floor x 3 coats. The first coat will cover less surface until the surfaces is sealed. The second and third coat will absorb less varnish. Respect the drying times to achieve the best results.
Tover Home Floor Lacquer - outstanding looks for fair prices!