Chimiver Hercules Two Pack Wood Adhesive 12.5 KG

Chimiver Hercules Two Pack Wood Adhesive 13 KG 

• Odourless two component wood adhesive for wooden floors with low sensitization level

• Outstanding coverage area | Quick drying | Oak walnut colour | Superior flexibility level

• Suitable for all kinds of commercial and residential new floor fitting & wood floor repairs

• It can be used on concrete surfaces, screed, plywood, over pre-existing floors, walls

• Incredible workability and incredible elasticity | Also compatible with underfloor heating 

• Sold in a large 13 kg bucket that contains 1.2 kg of hardener | To be used indoors only

• To be applied over a clean, dust free, debris free and dry surface | Mixture rate 1 to 9

• Suitable for laying pre-finished and pre-calibrated hardwood and engineered wood floors

• Free of solvents, water and isocyanic resins | The product is also fire retardant 100%

• The product can also be used to install wood panels and wood plywood on all bases

• The estimated coverage area is about 15 to 20 sq meters depending on a few factors

• It can be spread out with a good quality notched trowel to create a uniform glue coating

• One of the most cost effective and most affordable wood adhesive available

Chimiver Hercules Two Pack Wood Adhesive 13 KG  | Why Use It

Not all wood adhesives are the same. Some wood glues are manufactured from solvents and contain very odorous components that could take weeks to wear off. Other types of wood adhesives are slow drying and limit access to some areas for 48 hours. Other wood adhesives are way too expensive to make any financial sense. But the new Chimiver Hercules Two Pack Wood Adhesive 13 KG is a different type of product that will impress even the most demanding users. The product contains no solvent, is 100% odourless, it dries in a matter of hours and is two pack. It enables the user to use the newly installed wooden floors within 5-8 hours.

Chimiver Hercules Two Pack Wood Adhesive 13 KG | Where To Use It

The amazing Chimiver Hercules Two Pack Wood Adhesive 13 KG is a professional wood adhesive suitable for all kinds of commercial and residential wood floor new installations and wood floor repairs. The product is highly versatile and it compatible with all concrete bases, screed, plywood, it can be applied over pre-existing finishes like porcelain tiles, ceramic tiles and natural stone tiles, it can also be used to install prefinished plywood on concrete and wood panels on blocks. The new Chimiver Hercules Two Pack Wood Adhesive 13 KG  is suitable for indoor use only. Highly recommended for installing sport room floors or areas where a highly flexible and elastic floor adhesive is required. Loved by the professional trades and adored by the DIY users.

Chimiver Hercules Two Pack Wood Adhesive 13 KG | How To Use It

Mix up the hardener with the adhesive itself until an uniform colour is achieved. After the harder is mixed with the wood adhesive, the user has a maximum of 2 hours to use the composition. To maximize its potential and to ensure great adhesion, please vacuum the floor a number of times, remove all visible debris and make sure that the surface is dry. Use a notched trowel to spread the adhesive in an even coat and then install whatever type of hardwood or semi solid wood floor you might have. Any excess adhesive that ends up on the floor should be removed before it dries. Clean all your tools and equipment after the job is completed.

Chimiver Hercules Two Pack Wood Adhesive 13 KG | Recommendations

Do not use the new Chimiver Hercules Two Pack Wood Adhesive 13 KG  on wet, dusty or very uneven surfaces. At least 65% of the wood floor has to be in direct contact with the wood to ensure durability and professional results. Do not mix up a number of wood adhesives or wood glues to avoid unwanted reactions. Do not use the new Chimiver Hercules Two Pack Wood Adhesive 13 KG without the hardener.

Chimiver Hercules Two Pack Wood Adhesive 13 KG