Chimiver Ecostar Polyurethane Water Based Floor Lacquer

Chimiver Ecostar Polyurethane Water Based Floor Lacquer

98.39€
Ex VAT: 79.99€
Product Code: ECST001
Availability: 12
Viewed 3290 times

Product Description

Chimiver Ecostar Polyurethane Water Based Floor Lacquer


  • One of the finest Italian water based floor lacquers ever manufactured

  • It will create a beautiful natural looking finish without altering the original wood colour

  • The product is suitable for residential traffic and medium commercial traffic as well

  • To be applied in a three coats system over a new or newly sanded wooden floor

  • Available in extra matt, matt, silk matt and high glossy finish | 2 hours drying times

  • It can be applied over all kinds of water based and solvent based wood primers

  • The estimated coverage area is between 10-12 square meters per 1L but it can vary

  • The new Ecostar Polyurethane Water Based Floor Lacquer is 100% food certified

  • Fume free, non yellowing, quick drying, high solid levels, high heel protection

  • The product is highly popular with the floor sanding and floor restoration industry

  • To be applied in coats with a varnishing roller moving along the fiber of the wood

  • If you are looking for a colour change, please use a coloured wood primer before

  • Apply the first coat of floor lacquer, allow to dry, quick sanding & then more coats

  • One coat of wood primer & 2 coats of lacquer or 3 coats of water based lacquer

  • The product is also great for sealing furniture, doors, frames, skirting boards, etc



Chimiver Ecostar Polyurethane Water Based Floor Lacquer | Why Ecostar 


Chimiver Italy manufactures some of the “greenest” and “eco” labeled floor lacquers and wood floor care products in Italy. Over 100 years of experience and innovation at your disposal. The new Ecostar Polyurethane Water Based Floor Lacquer is the final result of years of innovations and improvement. The product looks outstanding, it is very easy to use and dries as you apply it. There is little wonder the European floor sanding trade cannot get enough of it. The new Ecostar Polyurethane Water Based Floor Lacquer is a single pack water based floor lacquer that will provide years of protection on all types of wooden floors with medium traffic. By using the Chimiver range of woodcare products and spray mops you are guaranteed to extend the life of your floors dramatically.


Chimiver Ecostar Polyurethane Water Based Floor Lacquer | Where To Use 


There are two types of water based floor lacquers. One, is residential and medium commercial traffic floor lacquer and two is the heavy duty commercial traffic lacquers. The new Ecostar Polyurethane Water Based Floor Lacquer is a professional water based floor lacquer suitable for sealing all residential floors and stairs plus medium traffic commercial traffic floors. This outstanding quality water based floor lacquer is also suitable for sealing all indoor furniture, doors, frames, toys, skirting boards and other types of wood surfaces. It can be applied over all solvent and water based floor primers. It contains high levels of solids and it is known to last for many years with the appropriate maintenance. 


Chimiver Ecostar Polyurethane Water Based Floor Lacquer | How To Use


If you are planning to restore an old wooden floor, then you should start with the sanding. All pre-existing sealers have to be removed in full before a new coat of lacquer is applied. If you are planning to seal a new wooden floor, then a light floor sanding with 80 to 100 grit sanding paper is more than enough.


Step 1 : Make sure that the surface is sanded, finished properly, dry, dust free and flat

Step 2 : Make sure that you have prepared enough lacquer to cover the whole surface, 1 varnishing brush & 1 varnishing roll

Step 3 : Using the varnishing brush, apply 1 thin coat around the edges and all areas where the varnishing roll is unlikely to fit

Step 4 : Apply one thick and even coat of lacquer all over the surface. The surface has to look evenly wet but not soaked

Step 5 : Allow 2 hours to dry and using 150 grit sanding paper do one more fine sanding around the edges (by doing so you will remove all the imperfections and all dull patches)

Step 6 : Vacuum the floor until all the dust is extracted in full

Step 7 : Apply the next two coats of lacquer with 1 hour break between the coats. Sanding the floor after the second coat is not necessary but possible


***If you are using a primer before lacquering, make sure that the primer is fully dry before lacquering the floor. In this case you can sand up the floor after the primer has dried***


Chimiver Ecostar Polyurethane Water Based Floor Lacquer | Coverage


The coverage specified by the manufacturer is informative only. The actual coverage area will depend on a number of factors like the type of wood, the skill of the applicator, the quality of the sanding, if the floor was primed or not and the first coat is likely the cover way less than the second one. 


First coat without a primer : 8-10 sq meter per 1L

Second coat with or without a primer : 10-12 sq meter per 1L


You are just about to use one of the finest floor lacquers ever. The product will perform and the results will be impressive if the application process is respected. Bear in mind to use a flat mop to maintain your newly varnished floors. Always use proper wood floor cleaners and maintainers to extend the life of your floors for as long as possible. A floor sealed with the new Ecostar Polyurethane Water Based Floor Lacquer and maintained with Chimiver wood care products is likely to provide up to 10 years of protection.


Chimiver Ecostar Polyurethane Water Based Floor Lacquer

Write a review

Note: HTML is not translated!
    Bad           Good

When you order from cleanfast.ie, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!