Faber ABR 600 | 250 ML
-500x500.jpeg)
(€28.30 ex. VAT)
SKU#: ABR 600
6 in stock
Dispatch within 12 Hours: Your order will be shipped quickly.
Quality Guarantee: Professional-grade cleaning products meeting industry standards.
Click & Collect: Mon–Fri, 7 AM – 3 PM pickup available.
Bulk Order Savings: For larger quantities, call us at 1800 848 700 to get a better price.
Our customer representative is ready to help.
Call for immediate assistance at 1800 848 700
Fine Surface Grinding With Amazing The Faber ABR 600
- professional low cost grinding cream from Faber
- easy to use polishing cream (without any training)
- it will work great on marble,quartz, tiles, terrazzo, etc
- to be used where mechanical polishing is not possible
- amazing product, cost effective, efficient, fast acting
Faber ABR 600 | Safety Information
Designed for professional use. Always follow the manufacturer’s instructions and safety guidelines. Suitable personal protective equipment should be used. Keep out of reach of children.
Faber ABR 600 | Why Use It
When it comes to polishing your natural stone surfaces, you want to work with a product that gets the task done without you having to spend hours on it. A quick and effective solution that you can employ to reduce the amount of resources that are typical of the conventional mechanical techniques. This is while also taking the safety of the material being worked on into consideration.
After all, you don’t want to corrode the natural stone in your efforts to restore a shine to the surface. Faber has got you covered with the ABR 600. This product has been formulated to be suitable for a wide range of surfaces, both indoors and outdoors. These include marble and its agglomerates such as marble-cement and marble-resin agglomerates, granite, glazed ceramics, travertine, to polished, natural, textured and lapped porcelain stoneware, limestone, plus quartz-resin agglomerates.
Multipurpose cream
This formulation is based on micro-abrasive polishing elements. It can be incorporated into different parts of the polishing process, based on the surface you’re working on, and the intended purpose. For example, you may want to remove scratches and scuff marks, and prepare the floor to be polished using chemical formulations.
The Faber ABR 600 comes in to be used in place of the intermediate grain sizes- the likes of diamond resin pads rated at size 400 to 800, that are used during mechanical polishing. This is also the case for those scenarios where traditional systems are not applicable, like when you’re working on an area that has already been furnished, or other elements have been set up, or floors with lippage and the levels and corresponding grout widths are different. In such instances, it wouldn’t be possible to lug around heavy machinery.
The Faber ABR 600 effectively reduces water and resource use in mechanical polishing while cleaning brushed natural stone surfaces. It enhances dirt resistance on ceramic, porcelain, and textured stoneware, softening rough materials to minimize dirt accumulation. With coverage of 30 to 40m² per kg, it offers a cost-effective solution for improving polishing processes.
There are also those cases where you’re aiming for a honing effect. In these situations, the surfaces are already polished, but don’t have a shine. The Faber ABR 600 comes in to give them a matt finish, which is soft and even. What’s more, when using this abrasive cream, you won’t have to worry about the scratching that is associated with mechanical polishing systems.
On the other hand, you may actually be looking to reduce the shine. The Faber ABR 600 will be up to the task. In fact, working with it enables you to avoid using acid-based products that would put the surface at risk, or deal with taxing mechanical processes. It also complements other products. For instance, you can use it with the K100 when restoring the deep surface aggressions on surfaces that have been buffed, for those cases where you want to enhance the effectiveness of the product.
How To Use The Faber ABR 600
As is with every other surface care treatment, you don’t want dirt getting in the way. As such, you’ll first need to clean the surface, getting rid of any dust, grime and other particles that are on it. Remember to cover sections that are adjacent to the surface, but not to be treated. Once ready, follow these steps:
- Shake the Faber ABR 600 bottle well, to even out the formulation.
- Apply 23 spoons of the product onto the section you’re working on. Ideally, this should be enough for every 2 m2 of surface.
- Add some water to the cream- a 1:1 ratio should suffice, such as each spoonful of cream going with 1 spoon of clean water.
- Spread the cream onto the surface, ensuring you cover the entire area evenly. Common equipment used for this process are manual rotary brushes, or a single disc machine rated at 1.5 HP and above. For the single disc machine, fit it with a white pad, and set it to 150 – 200 rpm.
Note that the mix should remain creamy all through the process. When it begins to dry up, simply add some water.
- Continue with the passes over the surface until you obtain the desired result. You can assess this by simply using a mop to remove the cream from a small area that you’ve already worked on. Usually, it takes 15 to 25 passes with the polisher to obtain satisfactory results.
- Vacuum the surface to remove any residue. Alternatively, you can rinse it with lots of water.
- Allow to dry. The surface will be ready to use.
Tips To Optimize Working With The Faber ABR 600
- Carrying out a spot test on a small and unexposed area is advised, especially for cases where you’re not sure if the product is compatible with your particular type of surface.
- While you can work on the whole area at a go, it’s recommended that you divide it up into smaller sections that are more easier to manage- like 2 m2 each, that way the application will be a breeze. When passing your single disc machine over the area, try to cover each section the same number of times as the rest.
- Always ensure the surface is dry before applying the Faber ABR 600. It also shouldn’t be overly heated, with the ideal temperature range for the surface being 5°C to 40°C
- When it comes to maintaining surfaces treated with the Faber ABR 600, it’s recommended that you use the following products: AlgaFloor or Neugel for the routine cleaning, and Deterfug or Faber 30 when dealing with stubborn soiling and heavy build-ups of grime.
Faber ABR 600 is a professional polishing cream designed to deliver fast and reliable results without the need for complex machinery or specialised skills. Suitable for marble, quartz, tiles and terrazzo, it works effectively in areas where traditional polishing methods are not practical. In the middle of any restoration process, Faber ABR 600 stands out by reducing effort, saving time and protecting delicate surfaces. Its micro abrasive formulation smooths imperfections while maintaining material integrity. This makes it a smart choice for professionals seeking a simple, versatile and cost conscious solution that performs consistently across multiple surface types.
Faber ABR 600 offers a practical alternative to heavy mechanical polishing systems, providing a smooth and refined finish with minimal setup. Ideal for indoor and outdoor surfaces, it enhances texture, improves cleanliness and gently refines rough areas. At the core of its performance, Faber ABR 600 delivers controlled abrasion that avoids surface damage while improving appearance. It is especially useful in furnished spaces or uneven floors where machinery cannot be used. This cream is valued for its versatility, efficiency and ability to simplify polishing tasks while maintaining professional quality results across a wide range of materials.
0.0
0 Reviews
Submit Your Review
More Products From Faber Marble Care Products | Faber Products
Discover high‑quality cleaning products from the same trusted brand.
-300x300.jpeg)
_2nd-300x300.jpeg)
_4nd-300x300.jpeg)
-300x300.jpeg)
_2nd-300x300.jpeg)
_3nd-300x300.jpeg)
Related Products
Discover more alternatives and similar items.
-300x300.jpeg)
_3nd-300x300.jpeg)
-300x300.jpeg)
_3nd-300x300.jpeg)
_2nd-300x300.jpeg)
_2nd-300x300.jpeg)
-300x300.jpeg)
