Faber Concrete Finish Plus 5L
_4nd-500x500.jpeg)
Faber Concrete Finish Plus is a water based concrete sealer that waterproofs, resists dirt, and prevents stains. Designed for heavy foot traffic, it delivers a natural satin finish, is non yellowing and fume free, easy to apply, easy to maintain, and compatible with all concrete surfaces.
(€55.50 ex. VAT)
SKU#: 020200241
12 in stock
Dispatch within 12 Hours: Your order will be shipped quickly.
Quality Guarantee: Professional-grade cleaning products meeting industry standards.
Click & Collect: Mon–Fri, 7 AM – 3 PM pickup available.
Bulk Order Savings: For larger quantities, call us at 1800 848 700 to get a better price.
Our customer representative is ready to help.
Call for immediate assistance at 1800 848 700
Protect Your Concrete Floors With The New Faber Concrete Finish Plus
- Water based finishing sealer compatible with all types of concrete surfaces
- It provides a superior dirt resistant coat that stains proofs and waterproofs
- Suitable to use as the main protector for areas with intense daily foot traffic
- Easy to apply and very easy to maintain after the initial application | sealing
- A resin and wax based concrete sealer highly popular with the professionals
- It can be applied with a flat mopping system, a special applicator or a roller
- Apply 2 coats of the new Faber Concrete Finish Plus with 2 hours drying time
- A non yellowing and fume free waterborne based concrete sealer from Faber
- It can be applied over pre-existing finishes or it can be used to glaze surfaces
- It leaves a cool satin finish without creating a fake artificial concrete finish
- Apply the first coat from North to South and the second coat from West to East
Faber Concrete Finish Plus | Safety Information
Designed for professional use. Always follow the manufacturer’s instructions and safety guidelines. Suitable personal protective equipment should be used. Store in a cool, dry place out of reach of children.
Faber Concrete Finish Plus | Why Use It
Polishing concrete used to be a matter for the professionals only. The new Faber Concrete Finish Plus has made polishing concrete a much easier process and it is also highly cost effective. The new Faber Concrete Finish Plus is a water based, fume free and non yellowing concrete sealer that can be easily applied to any type of concrete floor to seal it and to create an elegant satin finish. The new Faber Concrete Finish Plus can be successfully applied to grinded concrete surfaces or to rough concrete surfaces. It dries in a matter of minutes and it creates a great barrier between the daily traffic and the concrete. By sealing your concrete floors with the amazing Faber Concrete Finish Plus you will notice that the daily floor maintenance is much more effective and easier to do.
Faber Concrete Finish Plus | Where To Use It
The new Faber Concrete Finish Plus can be used on pretty much any type of dry and clean concrete or concrete based surfaces. The product is suitable for all kinds of indoor and outdoor applications and it can be applied with a standard painting roller or a large brush. Within a few hours after the initial application, the concrete surface will become waterproofed and stain proofed. The new Faber Concrete Finish Plus will slightly enhance the colour of the concrete and it will also harden up the concrete structure. It can be successfully used to seal concrete floors, footpaths, concrete walls, concrete statues and concrete beams, concrete benches, etc. A multi use concrete sealer from Faber.
Faber Concrete Finish Plus | How To Use
The most important factor when sealing concrete surfaces is the humidity. For the new Faber Concrete Finish Plus to be able to fully penetrate the concrete surface has to be fully dry and clean of dirt and residue. The product is ready to use and it does not require any dilution. Here is the step by step application process:
- Vacuum the concrete surface a number of times until the surface looks spotless.
- Assess the concrete surface and if you notice wet spots, either dry it or wait until it dries.
- Use a small brush to apply the new Faber Concrete Finish Plus around narrow areas.
- Use a painting roller or a varnishing roller (depending on the roughness of the area) to apply the new Faber Concrete Finish Plus over larger surfaces.
- Roll the product in until all excess material is either absorbed by the surface or the whole surface looks evenly wet.
- Allow 2-4 hours drying time and then proceed to apply the second coat. If you have applied the first coat from North to South, then go from East to West with the second coat. Basically the opposite way.
- Allow the floor to fully dry before the area is used. The drying times can vary dramatically based on the application tool, system or experience.
Faber Concrete Finish Plus | Recommendations
Do not use the new Faber Concrete Finish Plus over dirty or wet areas. Do not apply the new Faber Concrete Finish Plus over highly polished concrete surfaces or any other materials besides the concrete. Do not dilute the product and do not mix the product with any other concrete sealer.
Faber Concrete Finish Plus makes sealing and maintaining concrete simple and cost effective. This resin and wax based sealer penetrates dry concrete to form a protective coat that resists dirt, stains and moisture. Suitable for floors, walls, footpaths and concrete features, it slightly enhances colour while preserving a natural look. Quick drying and easy to maintain, it is popular with professionals for busy environments. Two coats provide reliable protection and help reduce ongoing cleaning effort while extending the life and appearance of concrete surfaces.
Faber Concrete Finish Plus is a water based concrete sealer designed to protect and enhance all types of concrete surfaces. It creates a durable dirt resistant barrier that helps waterproof and stain proof floors while leaving a natural satin finish. Ideal for areas with heavy daily foot traffic, it is easy to apply with a mop, roller or applicator. The formula is fume free and non yellowing, making it safe and pleasant to use indoors or outdoors. It can be applied over existing finishes or directly onto clean concrete to improve surface strength, appearance and long term maintenance.
0.0
0 Reviews
Submit Your Review
More Products From Faber Marble Care Products
Discover high‑quality cleaning products from the same trusted brand.
_4nd-300x300.jpeg)
-300x300.jpeg)
_5nd-300x300.jpeg)
-300x300.jpeg)
-300x300.jpeg)
Related Products
Discover more alternatives and similar items.
We’ll email you as soon as this product is back in stock.
Prochem Stone Seal 5L
_5nd-300x300.jpeg)
We’ll email you as soon as this product is back in stock.
Faber Scratch Off Kit
-300x300.jpeg)
_2nd-300x300.jpeg)
_2nd-300x300.jpeg)
_3nd-300x300.jpeg)
-300x300.jpeg)
_5nd-300x300.jpeg)
_3nd-300x300.jpeg)
-300x300.jpeg)
_3nd-300x300.jpeg)
_4nd-300x300.jpeg)
-300x300.jpeg)
_3nd-300x300.jpeg)
_2nd-300x300.jpeg)
You must be logged in to post a comment.