Prochem Stone Seal 5L
Prochem Stone Seal 5L is a fast drying, water based impregnating sealer that protects semi absorbent stone from stains, moisture and chemicals while preserving a completely natural, matt finish indoors and outdoors.
(€54.71 ex. VAT)
SKU#: R603-05
Out of stock
We’ll email you as soon as this item is available.
Dispatch within 12 Hours: Your order will be shipped quickly.
Quality Guarantee: Professional-grade cleaning products meeting industry standards.
Click & Collect: Mon–Fri, 7 AM – 3 PM pickup available.
Bulk Order Savings: For larger quantities, call us at 1800 848 700 to get a better price.
Our customer representative is ready to help.
Call for immediate assistance at 1800 848 700
Try The New Prochem Stone Seal 5L
- A matt finish water based floor sealer and floor protector from Prochem
- It does not alter the original look of the stone and it allows natural ventilation
- It can be successfully used to seal all types of semi absorbent stone surfaces
- It creates a durable barrier against grease, oils, dirt impregnation, water marks
- It can be applied with a flat mopping system, a varnish roller or a cloth
- The product is fume free, it dries out in minutes and it dries up nearly invisible
- Use it to seal terracotta, limestone, concrete, sandstone, decorative tiles, paving
- The coverage area is anywhere between 30 to 50 sq meters per 1L of sealer
- It facilitates easy daily maintenance and it prevents chemical stone damage
- The product is recommended for sealing commercial & residential hard floors
- A ready to use formula that requires no dilution I Pre-testing highly recommended
Why Use The Incredible Prochem Stone Seal 5L
The new Prochem Stone Seal 5L is one of the most cost effective and most natural looking water based floor sealers available. The product will fully penetrate the stone surface and it will create a protective layer inside the stone while allowing natural ventilation. The new Prochem Stone Seal 5L is much more affordable than similar products, it dries faster and it does not affect the final look of the stone. It can cover up to 200 sq meters of stone per 5L of the product based on the porosity of the surface. It does not react with harsh chemicals and it is not affected by UV light.
Where To Use It
This product is an impregnator that has to impregnate the stone and dry inside. To be able to do just that, the product can only be applied on surfaces that have a medium to high absorbency. It can be safely used to seal concrete floors and general concrete surfaces, limestone surfaces, travertine, some marble floors, terracotta, sandstone, bricks and others. It can be used for all kinds of indoor and outdoor applications. Most surfaces will be fully sealed after one coat of the new Prochem Stone Seal 5L, but two coats are possible. The product will not change the original look of the surface, it will not create an artificial glazing and it will not peel off. Its coverage area can dramatically vary from surface to surface.
How To Use The New Prochem Stone Seal 5L
The surface has to be sealant free, dry and residue free. If there are any pre-existing finishes, it should be stripped off with one of Prochem`s floor strippers or the surface should be grinded with sanding paper or diamond pads to remove any protective layer. The product has to penetrate the stone in full and dry out inside the stone.
- Deep clean the entire surface to make sure that any ingrained residue, grease patches, oils, dust and other residues are fully removed before the sealer is applied.
- Allow the entire surface to dry off and do not proceed to the sealing of the surface unless it looks 100% dry.
- You can use a flat mopping system with a good quality microfiber flat mop head or a varnishing roller to apply it. Apply a thin coat of it making sure that the entire surface looks wet but not soaked in sealer. While being applied, the new Prochem Stone Seal 5L is likely to darken up the surface and create a wet look finish but it will fully dry invisible.
- Allow at least 1-2 hours of drying time between the coats. If the results are satisfactory after one coat, do not apply the second coat. If a second coat is required, apply it by using the same process and then do not walk on the surface for 2-3 hours
Our Recommendations
The new Prochem Stone Seal 5L is fully matt so there will be no sheen or gloss after it dries. The new Prochem Stone Seal 5L is an impregnator not a glazer. It cannot be used on already polished surfaces or surfaces with no absorbency. Do not soak the floor in sealer while applying the product. Do not walk on the surface while it is drying. Do not use bleach based or acidic products to maintain the floors afterwards. Make sure to have enough product to cover the entire area.
Safety Information
Always follow the manufacturer’s instructions and safety guidelines. Use the recommended personal protective equipment. Store safely out of reach of children.
Prochem Stone Seal 5L delivers a natural matt finish while protecting semi absorbent stone from grease oils dirt and water marks It penetrates deep into the surface creating an invisible barrier that allows the stone to breathe and keeps the original look unchanged Quick drying fume free and ready to use it suits terracotta limestone concrete sandstone tiles and paving indoors or outdoors
Easy to apply with a mop roller or cloth this water based sealer covers up to 50 square meters per litre and requires no dilution It resists chemicals UV light and daily wear while simplifying maintenance A cost effective choice for commercial and residential floors it prevents damage without peeling gloss or artificial shine
0.0
0 Reviews
Submit Your Review
More Products From Prochem Carpet Cleaning Products
Discover high‑quality cleaning products from the same trusted brand.
Related Products
Discover more alternatives and similar items.
We’ll email you as soon as this product is back in stock.
Prochem Solvex 1L
We’ll email you as soon as this product is back in stock.
Prochem Fiberdi 10 KG
We’ll email you as soon as this product is back in stock.
Prochem Leather Cleaner 1L
-300x300.jpeg)
-300x300.jpg)
-300x300.jpg)
_4nd-300x300.jpeg)