-some of the most durable sanding belts available in Ireland
-made from top of the range aluminium oxide components
-the 100 grit sanding belt is suitable for the fine last sanding
-it will even up the floor and create a flat & smooth surface
-suitable to use with most commercial belt sanding machines
Zirconia Blue Belts- Working With The 100 Grit Belt
Zirconia sanding belts usually have a grit size range of 24 to 120. This makes the Zirconia Blue Belts – 250 x 750mm / 100 Grit sanding belts among those with the finest particles. The best thing about these belts is the fact that they allow the user to allow the best of both worlds with fine yet super strong abrasive surfaces. Below are 5 key benefits that you have to look forward to when working with the Zirconia Blue Belts – 250 x 750mm / 100 Grit
What You Have To Look Forward To With The Zirconia Blue Belts – 250 x 750mm / 100 Grit
1. It is useful on delicate surfaces
Finer Zirconia Alumina particles are most suitably applied on delicate surfaces. These include soft wood, laminate, ceramic tiles and even clay artwork. The fine nature of the surfaces requires efficient and precise sanding for perfect smoothness and evenness - and that and be achieved with the Zirconia Blue Belts – 250 x 750mm / 100 Grit.
2. It allows efficient surface staining
This applies mainly in carpentry and wood sculpting. During the final steps in these two practices, the wood is usually sanded down in preparation for staining. In this case, high grit sanding belt like the Zirconia Blue Belts – 250 x 750mm / 100 Grit belt are the best option. The sufficiently prepare the surface for the staining process without interfering with the smooth and even finishing. The also help by creating fine and undetectable channels through
which the dye can seep into the wood for even staining.
3. There is no risk of surface damage through scratches and streaks
One of the most important benefits of working with fine particle belts like the Zirconia Blue Belts – 250 x 750mm / 100 Grit sanding belt is the fact that you get to eliminate risks of surface damage. Sanding is a tricky process and could either make your surface nice and smooth or horrid and full of streaks and scratches. However, with fine grit particles this is not something that you will have to worry about. This benefit makes the Zirconia Blue Belts – 250 x 750mm / 100 Grit belts perfect for application not only in carpentry and art but also in automobile and machine repair. Here, their ability to smoothen out surfaces without damaging them is taken advantage of mainly during the finishing process.
4. It is a lot easier to clean
Zirconia sanding belts with fine particles like the Zirconia Blue Belts – 250 x 750mm / 100 Grit are considerably easier to maintain. With regular cleaning and occasional vacuuming, your belt will always be ready for action. The nature of the particles also ensures that the belt does not damage the special sanding belt cleaner.
5. They are the most effective for high precision sanding
Finally, if you want fine sanding to bring out specific details in your project then the Zirconia Blue Belts – 250 x 750mm / 100 Grit sanding belt is the way to go. The fine particles are practically made for the very purpose of high precision sanding whether it is a simple finishing or delicate curving. Whatever the case, if it is details you are after then the 100 grit belt is the way to go.