Nordicare Pine Oil

Nordicare Pine Oil

• Deep penetrating sealing oil highly recommended for waxing pine furniture

• It can also be used for impregnating and waterproofing most types of wood

• The product is food certified and it can be used as a refresher or as a wax

• To be applied over a dust free, debris free and fully dry real wood surface

• It creates a smoother surface and it creates a protective barrier against dirt

• It can be applied with a cleaning cloth, a varnishing roller or a painting brush 

• The product is manufactured from a fine quality blend of organic oils | waxes

• One of the most affordable and cost effective furniture oils

• Safe to use on kitchen tables, chairs, worktops, furniture, doors, frames, etc

• It is not affected by the UV light and it does not release fumes while applied

• The product facilitates easy maintenance and it fully stain proofs the surface

Nordicare Pine Oil | Why Use It

Pine furniture and generally pine wood is one of the most popular and most affordable types of wood. There are many types of furniture manufactured from either fully or partially from pine. With proper maintenance and regular care, any type of pine surface can end up looking great and can last for generations. The new Nordicare Pine Oil is a professional sealing oil highly recommended for sealing and waterproofing wood surfaces. The oil can be used to fully seal and protect all kinds of unsealed or untreated wooden surfaces or it can be used to refresh already sealed pine surfaces. This product is not recommended for sealing or waxing wooden floors. A professional quality pine oil that can restore and refresh your pine surfaces.

Nordicare Pine Oil | Where To Use It

Use the new Nordicare Pine Oil to seal newly sanded or new pine furniture that was never sealed before. Use the new Nordicare Pine Oil to refresh already waxed or oiled pine surfaces. Use the new Nordicare Pine Oil on all kinds of pine furniture, pine frames, pine statues, pine handles, pine doors, pine skirting and other types of real pine surfaces. The new Nordicare Pine Oil can also be used on other types of wood surfaces that were previously sealed with a natural oil sealer or were never sealed before.

Nordicare Pine Oil | How To Use It

The new Nordicare Pine Oil is a ready to use wood oil that is designed for pine wood. The product has to be applied to a clean, dry and stain free surface. All surfaces have to be deep cleaned if the surface is getting refreshed or sanded if the surface has bad stains or pre-existing sealers are still on it. 

1. Deep clean the surface with a good quality cleaner or sand up the wood up to grit 120.

2. Apply a thick coat of the new Nordicare Pine Oil and allow it to sink in for about 15 min.

3. About 15 minutes later, remove all the excess oil and give the surface a good buffing.

4. For regular refreshing one coat is enough while for the first sealing 2-3 coats are required.

5. Refresh the surface once in a while to keep the wood nourished and to prevent damage.

Nordicare Pine Oil | Recommendations

Do not use the new Nordicare Pine Oil on varnished surfaces. Do not mix up the new Nordicare Pine Oil with any other products and do not dilute the product. Do not forget to remove all the excess oil from the surface. Do not apply the new Nordicare Pine Oil over wood surfaces that have visible water damage or deep stains. Do not use the new Nordicare Pine Oil on wooden floors. Store the product away from the direct sunlight and out of reach of children.

Nordicare Pine Oil