Chimiver Ecostar 2K Commercial Traffic Water Based Floor Lacquer

Chimiver Ecostar 2K Commercial Traffic Water Based Floor Lacquer

• Heavy duty commercial two pack water based floor lacquer from Chimiver

• Suitable to use on all types of wooden floors with very high commercial traffic

• The product is sold in 5L bottles + 0.5L hardener | Non yellowing & fume free

• It can be applied over all kinds of solvent | water based primers & oil stains

• Outstanding anti-scratch protection, superior high heel protection, stain proof

• Unaffected by general floor cleaning products | It can be refreshed as needed

• Available in natural finish, extra matt finish, semi gloss finish and gloss finish

• The ideal floor lacquer for offices, pubs, restaurants, schools, gyms, bars, etc

• To be applied with a varnishing roller, a large soft brush or a special applicator

• The hardener and the lacquer have to be mixed up about 10 min before use

• One of the “greenest” water based floor lacquers available on the open market

• Easy to apply, quick drying, beautiful natural looking finishes, excellent durability

• The estimated coverage area is around 10 to 12 sq meters per 1L of lacquer

• This is a money making product for the floor sanding and refinishing trade

Chimiver Ecostar 2K Commercial Traffic Water Based Floor Lacquer | Why Ecostar 2K

This is not just another two pack water based floor lacquer. This a proper heavy duty water based floor lacquer, with outstanding durability, outstanding natural looks and unequaled anti scuff mark resistance. Even better, the new Chimiver Ecostar 2K Commercial Traffic Water Based Floor Lacquer is a very affordable floor lacquer. This product is loved by the commercial market and by the DIY users. It dries faster than most floor lacquers and it looks better than most other water based floor lacquers. The product is compatible with all solvent and water based floor primers, all oil and water based wood stains and all types of wooden floors. It looks special on oak, teak, pine, red and white deal, etc. 

Chimiver Ecostar 2K Commercial Traffic Water Based Floor Lacquer | Where To Use

Wherever there is a commercial traffic wood floor or areas with high risks of staining and scratching, you can use the new Ecostar 2K Commercial Traffic Water Based Floor Lacquer. This product was designed to deal with very high traffic wooden floors, with wooden floors exposed to UV light, with wooden floors exposed to high pressure and wooden floors that require that bit extra. You will find the new Ecostar 2K Commercial Traffic Water Based Floor Lacquer used in restaurants, pubs, offices, halls, reception rooms and high traffic residential wooden floors. A top quality water based floor lacquer that is particularly good to use on floors used by pets. It does not glaze a lot so the pet cannot scratch it easily. It complies with all anti-slip regulations and is one of the most eco-friendly floor lacquers money can buy. If you are looking for a natural finish, then select the extra matt, if you are looking for a bit of sheen but not too much, then select the semi gloss finish and if you are after a super glossy finish, then select the gloss finish. The product was designed for indoor use only. It can also be successfully used on all kinds of wood furniture, frames, doors, skirting boards, toys, handles & work tops. The product is food certified so it is safe to use around food preparation and food serving areas. 

Chimiver Ecostar 2K Commercial Traffic Water Based Floor Lacquer | How To Use

Mix up the lacquer with the hardener before applying it on the floor. Assess the floor surface and budget for about 10-12 sq meters of coverage per 1L.

Exp: If you have 20 sq meters to lacquer in 2 coats, you will need to mix up about 4 L of lacquer. The first coat will cover around 10 sq meters but the second coat (because the absorption is reduced by the first coat) will cover up to 14 sq meters. Remember, any lacquer that was mixed up with the hardener and not used within 4 hours will harden up inside the bottle and it will be unusable. 

The wood surface has to be sanded, dust free and residue free. Apply the primer or the wood stain and allow 2 hours to dry. Then prepare for varnishing. You will need 1 brush, 1 roller & the handle and 1 tray or square bucket. Using the small brush apply a coat of lacquer all over the skirting boards and all areas where the varnishing roller does not fit. Use the varnishing roller to apply a nice even coat of floor lacquer all over the floor. Always work from the wall to the door. The door exit has to be in your back to prevent getting trapped. Do not roll the lacquer against the wood fiber. Always move along with the fiber of the wood. The first coat of lacquer should fully dry within 2 hours. Apply one more coat and the job is completed.

1. Do not apply the lacquer while the underfloor heating is on

2. Do not mix up a number of lacquers of different sheen levels

3. Work in well ventilated areas to speed up the drying process

4. Use clean tools and buy quality varnishing rollers to create streak free finishes

5. Do not apply more than 3 coats of lacquer to prevent over-glazing the floor

6. Do not walk on the surface while the floor is still wet

7. Vacuum, then vacuum more & do it one more time

8. Allow the floor to fully cure for 24 hours before allowing pets on the floor

9. Maintain your floors with quality spray mops & proper wood floor cleaners

10. Refresh the floor as it gets damaged

Chimiver Ecostar 2K Commercial Traffic Water Based Floor Lacquer