Tover Tovcol PU2C | Two Component Polyurethane Adhesive For Wood

Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood

• Two component polyurethane adhesive, solvent and odour free

• Suitable for installing semi and hardwood floors on all surfaces

• Highly recommended for fitters sensitive to some epoxy resins

• Dilution rate 1 to 9, add the hardener to the mixture before use

• Available in two colours, brown and light brown, highly elastic

• Suitable for residential and high traffic commercial floor fitting

• The most innovative wood adhesive from the whole Tover range

• Affordable, low cost, odourless, easy to use & apply, eco-friendly

• Highly appreciated by all professional floor fitters and installers

• 10 kg bucket, very high coverage area, compatible with all floors

Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood - Why use

Not all wood adhesives are the same. Not all wood adhesives last as long and bond well with the substrat. But the new Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood is a product in its own class. The product contains 0 water and solvent. It is 100% odourless, manufactured from eco friendly components and it will bond to pretty much any type of substrate. This particular product is highly recommended for installers that are allergic to epoxy resins. The new Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood will dry in a matter of hours and it will last for generations. A proper professional wood adhesive from Tover.

Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood - Where to use

You can use the new Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood on pretty much all types of substrates and you can fit all types of wood floors with it. The product will attach to concrete floors, will attach to other wooden floors, it can be used to install new wooden floors over tile floors, it can be used on plywood or any type of wood substrate. Unaffected by humidity, the product will fully dry in a matter of hours. The substrate does not require any sealing or any type of special treatment. Just make sure that the substrate is clean and dust free. The new Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood is suitable for indoor wood installation. It can be used on vertical or horizontal surfaces. 

Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood - How to use

Even if the substrate does not require any special preparation, it has to be level and it has to be residue free. Vacuum the floor well to remove all dust particles and all fine residue. Mix up the hardener with the adhesive and you are ready to apply the adhesive to the substrate. Use a special trowel with gaps to spread the adhesive evenly. Work in small areas to avoid having to walk on the newly installed floors. Always work from the wall to the exit area (all the professionals are well aware of this but some domestic installers might trap themself in a corner with no way of getting out without having to walk on the floor). Remember, the new Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood will require 24 hours of drying time before you can walk on the floor. Even if the floor might look dry, it still can be wet under it. 24 hours later you can start using the floor as usual.

The new Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood is one of the most advanced and most innovative wood adhesives out there. A fine quality product that will install your floors nicely without polluting the planet. A low cost but highly effective wood floor adhesive from Tover

Tover TOVCOL PU2C | Two Component Polyurethane Adhesive For Wood