Osmo Wood Wax Finish Extra Thin Clear Satin

Osmo Wood Wax Finish Extra Thin Clear Satin

34.59€
Ex VAT: 28.12€
Brand: Osmo Oils
Product Code: 1101
Availability: 10
Viewed 5265 times

Product Description

Osmo Wood Wax Finish Extra Thin Clear Satin


  • Deep penetrating hardwax oil compatible with very low absorbency wood surfaces

  • Highly recommended for waterproofing mahogany, teak, walnut, iroko & other types

  • Manufactured from a blend of organic oils, this product is 100% safe & food certified

  • Suitable for indoor use only | Clear satin finish | To be applied in a two coats system

  • To be applied over a new or newly sanded surface or it can be used as a refresher

  • The product will penetrate deep & it will not glaze the surface, it will not peel or flake

  • Areas with higher traffic can be refreshed regularly without having to sand the surface

  • The product will cover around 25 sq M per 1L but it can vary depending on porosity

  • It can be applied with a cloth, a flat mopping system or a low speed floor scrubber

  • Estimated drying time is around 12 hours but it can depend on a number of factors

  • The most natural way of waterproofing and stain proofing any wooden floor | area


Osmo Wood Wax Finish Extra Thin Clear Satin | Why Osmo


While most types of hardwax oil can work well on most types of wooden surfaces, some dense or very compact types of wood can dry up patchy. Wood types like teak, mahogany or cedar are likely to have different levels of absorbency on different areas so this can mean that some areas will dry patchy. The new Osmo Wood Wax Finish Extra Thin Clear Satin is a very thin type of hardwax oil that can penetrate even the most compact types of wood. The product will provide outstanding durability, outstanding waterproofing & stain proofing qualities and it will also maintain the natural look of the wood. The product does not exfoliate, does not flake and it does not peel. A proper natural way of sealing all kinds of wooden surfaces.


Osmo Wood Wax Finish Extra Thin Clear Satin | Where To Use It


As long as the wood surface that you are planning to seal is sealant free, dry and residue free, you can use the new Osmo Wood Wax Finish Extra Thin Clear Satin on it. For standard types of wooden surfaces like pine or oak, you should use a thicker product. This particular hardwax oil is great for really hard fiber wood surfaces. The product is recommended for indoor use only. To be applied in a two coats system over a dry and sealant free surface. It can be used to waterproof and stain proof wood floors, stair cases, furniture, presses, frames, doors, window sills, worktops, kids toys, etc. The amazing Osmo Wood Wax Finish Extra Thin Clear Satin is food safe so it can be used on all surfaces where food is being prepared or served. 


Osmo Wood Wax Finish Extra Thin Clear Satin | How To Use It


Remember, to be able to use the new Osmo Wood Wax Finish Extra Thin Clear Satin, the wood surface has to be sealant free, dry and residue free. Any pre-existing finishes have to be removed in full before the oil is applied. So sand up the surface nicely and prepare for oiling. The product is ready to use so it does not require dilution. The estimated coverage area of 25 to 30 sq meters per 1L is estimated only. The first coat is likely to only cover 15 sq meters while the second coat can stretch up to 40-50 sq meters per 1L. It also depends on the application system. 


  1. Shake the tin well to create a perfect uniform composition

  2. Put a pair of gloves on and prepare your application tools

  3. Place a cloth into the oil and apply the product in a very thin coat around the edges

  4. Remember to apply enough product to fill up the wood but remove all the excess oil

  5. The surface has to look wet but not soaked

  6. Do not walk on the surface for 12 hours

  7. The second coat can be applied 12 hours later 


Applying a coat or two of hardwax oil is not hard at all. The essential thing is to apply little oil and remove any excess from the surface. Any extra oil that has not penetrated the surface will dry up streaky and it will take a very long time to dry.


Osmo Wood Wax Finish Extra Thin Clear Satin | Recommendations


Do not wash the floor for at least 48 hours after oiling. Do not mix up a number of oils. Create good ventilation to speed up the drying time. Remember, all oiled floors and oiled surfaces require regular refreshments and top ups. Areas with high traffic are likely to wear off faster. You can use the new Osmo Wood Wax Finish Extra Thin Clear Satin to refresh surfaces that were already sealed with this particular oil. Use oiled floor cleaners only.


Osmo Wood Wax Finish Extra Thin Clear Satin

Write a review

Note: HTML is not translated!
    Bad           Good

When you order from cleanfast.ie, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!