Faber K500 | Polishing Cream For Engineered Stone

• Water based floor polishing cream for all kinds of artificial stone floors

• Suitable for commercial and residential floor polishing & maintaining jobs

• It will restore lost gloss & it will restore the protection damaged by the traffic

• By restoring the sheen on the stone, the product will facilitate easy cleaning

• Suitable for indoor and outdoor use, very easy application, cost effective

• It will cover around 40 to 50 sq meter of floor per 1L, a non glazing product

• To be applied with a white pad and a low speed but powerful floor buffer

• To be applied to a dry and spotless surface, buff the product until fully dry

• The surface does not require any extra drying time, ready for traffic fast

• Apply the new Faber K500 in small areas of 1 to 1.5 square meters at once

Faber K500 | Polishing Cream For Engineered Stone | Why use it

Many types of artificial stone floors like porcelain floors are likely to get damaged and scratched. Over time, there will be dull patches on the floors and the daily cleaning and maintenance of those floors will be negatively affected. A quick treatment with the new Faber K500 | Polishing Cream For Engineered Stone will rebuild the glazing of the stone and will reduce the porosity dramatically. By doing so, it will facilitate easy floor maintenance and less absorbance. Many residential and commercial floor owners consider replacing their dull looking floors because of all the damage caused by the daily traffic and harsh chemicals. By using the new Faber K500 | Polishing Cream For Engineered Stone, you will resolve this problem in no time and at a fraction of the cost of replacing the floor. 

Faber K500 | Polishing Cream For Engineered Stone | Where to use

The new Faber K500 | Polishing Cream For Engineered Stone is suitable for polishing and maintaining porcelain floors and all kinds of highly polished artificial stone floors. The product is suitable for indoor and outdoor use and it will cover over 40 sq meters of floor per 1L. Due to its high coverage area and its effectiveness, the new Faber K500 | Polishing Cream For Engineered Stone is one of the most cost effective polishing creams available. 

Faber K500 | Polishing Cream For Engineered Stone | How to use

The floor area has to be washed, degreased and prepared for polishing. All kinds of residue and dust particles have to be fully removed before polishing. To be able to polish the floor you will need a low speed floor buffer, preferably over 1.5 HP and a white pad. Apply 2-3 teaspoons of the product on the floor and buff it in until the surface has absorbed it and the floor has rebuilt the gloss. It is recommended to work in small areas of 1 to 1.5 sq meters to be able to apply the cream correctly. Basically you need to buff that particular area until the stone looks “glass” like. When the desirable results are achieved, move to the next area. Do not apply more than 2-3 teaspoons of cream to avoid clogging the floor pad and messing up the finish of the floor.

The new Faber K500 | Polishing Cream For Engineered Stone does not require any additional drying time. After the floor is washed once more, it can be opened to traffic. A fine quality polishing cream that will achieve unequalled results on porcelain floors. A highly cost effective product that will enable the user to restore old and worn floors to a brand new condition. 

Faber K500 | Polishing Cream For Engineered Stone