1800 848 700 (free) Please Call Us Before Dropping By The Shop | Ashleigh House, JFK Rd, D12 | D12 VE06 (Beside Redcow)
4.99 Euro Flat Fee Delivery For Parcels Up To 20 KG. Next Day Delivery Anywhere In Ireland (99% Of The Cases)
If You Are Not Sure About Any Of Our Products, Please Call Us. We Are Expers In Product Dilution, Stain Removal, Patio Treatments, Sealers, Varnishes, Wood Care Products, Refreshers & Applications Of All Kind Of Protectors. We Can Recommend You The Best And The Most Cost Effective Products.
Faber MA90 Solvent Based Stone Sealant & Wet Look Treatment For Natural Stones
-solvent based impregnator, stain proof & sealer from Faber
--sold in 1L bottles - it will cover 20-40 sq meters of surface per 1L
-suitable to use on all natural stones, paving, limestone, concrete
-it will dry in minutes and it will provide few years of protection
-to be applied over dry and clean surfaces (roller or a brush)
-it will enhance the surface and it will create a semi gloss finish
-UV rays resistant, anti slip, it will not yellow, very easy application
Protect Your Surfaces From Staining With The Faber MA 90
Floors, kitchen countertops, the bathroom vanity tops, all through to bar tops- these are at risk of staining due to the exposure to oils and dyes almost daily. Food and drink spills, whether it is the coffee that got knocked over during the morning rush to work, or some wine that sloshed from the glass during dinner with your significant other, cosmetic products such as the nail polish accidents that leave behind an unsightly mess, ink blots in the workspaces, all tough to greasy spots and lubricants that spill in the warehouses and garages- the stains they cause can be frustrating. Natural stones kick things up a notch due to their porous nature. The liquids quickly get absorbed by the material, and the deeper they get into the stone, the more difficult they will be to remove. Those elegant patterns and colours are suddenly replaced by patches of stains that scream out of the affected surface, ruining the ambience of the space. This is not how you want things to go. Stain-proofing comes in to avoid such situations. When the spills occur, the product’s job is to basically to repel them from the stone, and prevent it from bonding with the material. When looking for a treatment that is suitable for your particular kind of installation, additional factors such as the aesthetics also come into focus. After all, you don’t want the beauty of your floors, worktops or walls being eroded in the processes of stain-proofing it. Faber has provided the MA 90 to enable you to get the results you desire.
Bringing out the beauty of the natural stone
With the Faber MA 90, that characteristic veining of the stone, the colouration and grain all get enhanced. It sets an in-depth wet look, that adds to the aesthetic appeal of the installation. This solvent-based product has been developed to set a semi-gloss stain finish, and is particularly suited for working on the non-polished surfaces. You can use it to treat installations that have medium to medium-high levels of absorption.
One of the core roles of the Faber MA 90 is to stain-proof the surface, and it delivers on its mandate. The formulation is water- and oil-repellent. Thus, it prevents spills, be they from foods and drinks, cases like lubricants and oils that wind up on the floor, from seeping into the underlying layers of the stone. This gives you more time to attend to them and clean them off. In the process, it reduces the stresses and frustrations that come with cleaning, especially due to the porous nature of the stone. That way, you won’t keep going into panic mode whenever a glass gets knocked over. This also means that the elegance that is obtained gets to last for longer.
When it comes to surface finishes, you don’t want to watch the treatment developing an unsightly yellow hue over time. This is usually attributed to the reaction of conventional products under UV radiation. With the Faber MA 90, that won’t be a cause for concern. The formulation has been developed to be resistant to the radiation, hence does not yellow. This retains that semi-gloss satin finish, enabling you to enjoy the result for longer. This also means that it can be used on outdoor surfaces as well. The Faber MA 90 is applicable on limestone, slate, cotto, and granite, all through to sandstone, marble, reconstituted (eco) stone, porphyry, terracotta, plus basaltina - lava rock and cementina. It is available in 1L bottles (where each box contains 12 bottles), and 5L cans (a box comes with 4 units).
Start off by preparing the surface. It needs to be clean before you can treat it with the Faber MA 90. The dirt- whether it is particles of dust, pet fur and dander, soiling tracked into the building, food smudges or grease spots- these will affect the quality of the results. Give the surface a thorough scrub, rinse and let it dry. Speaking of which, the Faber MA 90 should not be applied onto the surface while it is still wet. In addition, the humidity levels of the surrounding environment also come into focus. Rain, fog and misty conditions should first be allowed to pass before proceeding with the application. Waiting for that short time will save you the frustrations that come with dealing with unsatisfactory results. The popular tools for the application include brushes, rollers and lambswool applicators. Here, it will depend on the equipment that you find to be the most convenient for you. Once ready, you can proceed to work on the surface.
Apply the Faber MA 90 evenly on the worktop, floor, wall or other surfaces that you’re working on. Use an abundant amount. Give it 5-10 minutes to be absorbed into the material, then proceed to redistribute the excess product that's on the surface. For the highly absorbent stone installations, there may not even be any excess that is left behind. The treated surface will have dried in 1-2 hours, though for floors the foot traffic should only be allowed back onto the area 4 to 6 hours after application.
For some property owners, you may desire to buff the surface after applying the Faber MA 90. This can be done 4-6 hours after the treatment. For floors, dry-brush the surface using a standard floor polisher machine, that’s set to 175 rpm. For the countertops, walls and other areas where the polisher will not be convenient, you can work with an orbital or a manual wheel.
Here are some extra tips that you should take note of in order to get the most out of the Faber MA 90:
If you're treating a recently primed surface, such as one where a penetrating water repellent was used, first allow it to dry before applying the stain-proofing treatment.
Observe the prevailing environment conditions before application. In case it is about to rain, or if there is mist or fog, allow it to clear up first before proceeding to treat the surface. This is as the high humidity conditions will affect how the product bonds with the surface.
Remember to clean the surface regularly. Avoid harsh chemicals that may react with the treatment. It’s recommended that you use units such as Faber 30, Deterfug and Neugel for the routine cleaning.