Prochem Ultrapac Renovate 5L

• An incredibly effective multi surface cleaner and prespray from Prochem

• A highly concentrated product that can emulsify dry soot, carbon and oil

• It can be used to remove and clean most types of carpets & safety floors

• Great on fire residue, filtration & ingrained soils, rubber & drought marks

• An excellent quality product that can fully restore and renovate surfaces

• Highly effective when used on most polypropylene carpets as a prespray 

• A red liquid with a pleasant floral fragrance | PH 10.5 | Very easy to apply

• Highly appreciated by the carpet cleaning and floor cleaning trade

• To be diluted from 1 to 20 up to 1 to 100 depending on the condition of the job

• It cleans, removes stains and fully deodorises in one easy application

• It can be used on floors, walls, carpets, hard surfaces, porous surfaces

• A professional cleaning product that can break & emulsify carbon residue

• Dilute the product in warm water for better results and allow time to work

Why Use This Professional Product

The carbon residue that can appear after a fire is a cleaner's worst nightmare. It is smelly, water resistant and very hard to break down. While some products do provide some level of results, nothing works as well as the new Prochem Ultrapac Renovate 5L. This professional pre-spray, cleaner and deodoriser is carbons worst nightmare and it can provide great results where other cleaning products have failed. It can be used as prespray to soften up the carbon residue or it can be used as the main cleaner. If you happen to have to deal with a cleaning project after a major fire, you should definitely have a look at the new Prochem Ultrapac Renovate 5L.

What Types Of Dirt Can Remove

You can use the new Prochem Ultrapac Renovate 5L to pre-spray carpets and fibres or it can be used as a cleaner to clean floors, walls, porose surfaces, all water washable surfaces, etc. It will deep clean and fully remove the smoke odours from all surfaces. It can fully remove:

Carbon | Soot | Smoke | Grease | Oils | Deeply Ingrained dirt

How To Use This Unique Product

Remove as much residue as possible from the surface. Dilute the product 1 to 20 up to 1 to 100 depending on the type of surface being treated and the condition of it. It can be applied with a pressure pump, a carpet cleaning machine, a spray system or even a mopping system. Allow at least 5-10 minutes of direct contact before giving the surface a light scrubbing and preparing the surface for extraction or powerwashing. The great thing about the new Prochem Ultrapac Renovate 5L is that the entire deep cleaning project of the whole property can be done with only one product. 

Our Recommendation

Do not apply the new Prochem Ultrapac Renovate 5L over badly soiled surfaces or surfaces that still have a lot of visible debris. The dilution rate is informative only and it can be decided on the spot after assessing the project. Do not mix up a number of cleaning products to avoid unwanted reactions. Some surfaces might require a number of treatments before the carbon residue and the smoke odour is fully removed. Always follow the manufacturer's safety guidelines before use. Store the product in a cool and dry place away from the direct sunlight and out of reach of children. Do not use the new Prochem Ultrapac Renovate 5L on highly polished surfaces, aluminum surfaces, polished stainless steel and very sensitive fibres. Pre-test for compatibility before using the new Prochem Ultrapac Renovate 5L on larger surfaces. This is a professional cleaning product and it should only be used by the professional trade.