_2nd-150x150.jpeg)
Faber Sol 170 I Solvent Based Water Repellent 1L
-500x500.jpeg)
Protect natural stone with powerful invisible protection. The advanced Faber SOL 170 Solvent Based Water Repellent & Impregnator penetrates deep into surfaces to block water and humidity while maintaining a natural matt finish. Ideal for indoor and outdoor stone with long lasting protection and excellent coverage.
(€18.50 ex. VAT)
SKU#: 020200023
56 in stock
Dispatch within 12 Hours: Your order will be shipped quickly.
Quality Guarantee: Professional-grade cleaning products meeting industry standards.
Click & Collect: Mon–Fri, 7 AM – 3 PM pickup available.
Bulk Order Savings: For larger quantities, call us at 1800 848 700 to get a better price.
Our customer representative is ready to help.
Call for immediate assistance at 1800 848 700
Invisible Protection With The E[ic Faber SOL 170 | Solvent Based Water Repellent & Impregnator
- Solvent based, highly concentrated, deep penetrating water repellent
- 100% matt, non glazing, non yellowing, little odour & very easy to use
- Compatible with all unsealed natural stone floors, fittings, statues, etc
- It can be used as a pre-treatment impregnator or as the main protector
- It will prevent water from penetrating the stone, from above and below
- It will maintain its outstanding protection even if the floor is deep cleaned
- The new Faber SOL 170 is a clear matt impregnator with no enhancer
- Suitable for sealing all types of indoor and outdoor natural stone floors
- Cheap, high coverage area, suitable for commercial & residential use
- To be applied on unsealed, clean and dry natural stone floors and tiles
- 1 L of Faber SOL 170 will cover around 30 sq meter of floor/surface
Faber SOL 170 | Solvent Based Water Repellent & Impregnator I Why SOL 170
The amazing Faber SOL 170 | Solvent Based Water Repellent & Impregnator was designed to prevent water & humidity from penetrating from the top or from the bottom. Unlike other similar products, the new Faber SOL 170 | Solvent Based Water Repellent & Impregnator will not affect the natural look of the stone, it will not glaze and it will not be affected by harsh chemicals or acids. Many floor polishing companies apply one coat of Faber SOL 170 | Solvent Based Water Repellent & Impregnator prior to honing the stone floors to prevent deep water penetration. A cost effective and highly efficient solvent based impregnator & water repellent from Faber.
Faber SOL 170 | Solvent Based Water Repellent & Impregnator I Where to use it
The new Faber SOL 170 | Solvent Based Water Repellent & Impregnator is compatible with all natural stone floors, all artificial tile floors that are not glossy or sealed with any type of protectors, with all types of concrete floors and slabs, block walls, terrazzo floors, etc. Use the Faber SOL 170 | Solvent Based Water Repellent & Impregnator to seal and protect indoor and outdoor surfaces. It can be applied in 1 coat system with a flat mopping system or some kind of applicator.
Just make sure that the stone is 100% dry before sealing it with the Faber SOL 170 | Solvent Based Water Repellent & Impregnator. A product that will not yellow and it will provide years of protection even in areas with more than usual traffic. This product is in big demand with builders and patio cleaners.
Faber SOL 170 | Solvent Based Water Repellent & Impregnator I How to use it
The surface has to be deep cleaned with one of Faber`s heavy duty alkaline floor cleaners to remove old residue, organic growth, algae, grease, food residue and other types of dirt. Allow time to dry before applying the sealer. When the surface looks 100% dry, you need to prepare for impregnating the stone.
The estimated coverage area is somewhere between 20 to 30 sq meters but it can be much higher or much lighter if the surface treated is highly absorbent or has no absorbance at all. Apply enough impregnator until the stone looks wet but not soaked. Don`t worry about the wet look, it will dry up matt when it dries in full. If you manage to miss some areas, no need to worry. You can touch up later. Make sure to remove excess sealer from the stone and do not walk on the surface while the area is drying.
If you are looking for a wet look or a very glossy natural stone sealer, do not buy the new Faber SOL 170 | Solvent Based Water Repellent & Impregnator. This product will not enhance or create any level of sheen on your floors. Work in well ventilated areas or use an air blower to speed up the drying process. This product is suitable for DIY use as well.
Faber SOL 170 | Solvent Based Water Repellent & Impregnator
Protect valuable natural stone surfaces with a powerful professional solution designed to stop water damage before it starts. The advanced Faber SOL 170 Solvent Based Water Repellent & Impregnator penetrates deep into stone and concrete surfaces to create invisible protection while keeping the natural appearance completely unchanged.
This impressive sealer prevents moisture from entering the stone from above or below while remaining fully matt and non yellowing. It works on natural stone, terrazzo, concrete and other absorbent surfaces both indoors and outdoors. Builders and contractors value the high coverage and easy application that delivers long lasting protection.
Highly concentrated and extremely reliable the Faber SOL 170 Solvent Based Water Repellent & Impregnator offers a smart way to protect floors, patios, walls and stone fittings. With professional grade performance and excellent durability it helps keep surfaces clean, dry and protected for years.
Keep natural stone surfaces looking flawless with an advanced moisture protection solution trusted by professionals. The innovative Faber SOL 170 Solvent Based Water Repellent & Impregnator delivers deep penetrating protection that stops water and humidity from damaging stone floors, walls and outdoor surfaces.
This remarkable impregnator creates invisible protection without altering the natural beauty of the stone. The matt finish keeps surfaces looking authentic while preventing moisture penetration even after heavy cleaning. Suitable for natural stone, terrazzo, concrete and unsealed tiles it works perfectly in homes, patios and commercial areas.
Easy to apply and highly efficient the Faber SOL 170 Solvent Based Water Repellent & Impregnator provides long lasting protection with excellent coverage. Its reliable performance and powerful sealing ability make it a cost effective choice for anyone looking to safeguard valuable stone surfaces from water damage.
0.0
0 Reviews
Submit Your Review
More Products From Faber Marble Care Products
Discover high‑quality cleaning products from the same trusted brand.
-300x300.jpeg)
_2nd-300x300.jpeg)
_3nd-300x300.jpeg)
_2nd-300x300.jpeg)
_5nd-300x300.jpeg)
Related Products
Discover more alternatives and similar items.
_2nd-300x300.jpeg)
_3nd-300x300.jpeg)
_3nd-300x300.jpeg)
_2nd-300x300.jpeg)
_3nd-300x300.jpeg)
_4nd-300x300.jpeg)
-300x300.jpeg)
_4nd-300x300.jpeg)
_4nd-300x300.jpeg)
_2nd-300x300.jpeg)
-300x300.jpeg)
_2nd-300x300.jpeg)
Recently viewed
Continue where you left off.
_2nd-300x300.jpeg)
You must be logged in to post a comment.