Faber AlgaFloor Maintainer

Faber AlgaFloor Maintainer

7.26€
Ex VAT: 5.90€
Product Code: ALGAFLOOR
Availability: 10
Viewed 16769 times

Product Description

Faber AlgaFloor Maintainer



  • a very efficient daily cleaner and maintainer for marble

  • it will deep clean, refresh and deodorise the floor surface

  • suitable to use on sensitive and very sensitive stone floors

  • highly concentrated and very cost effective, low foam

  • neutral floor cleaner that requires no rinsing after cleaning

  • suitable for commercial and domestic floor cleaning jobs



Faber AlgaFloor Review

The everyday dirt and grime that builds up on your surfaces is a threat to their appeal and your peace of mind. From the smudges on the kitchen countertops taking away their beauty, the soap scum on the bathroom walls that makes you cringe each time you take a shower, to the abrasive soiling on the floor that gets grinded against the surfaces under people's feet and wears it down, you want to get rid of it. The interior decor, your comfort in your home or working space, the living conditions of your family and environment in which your employees work in- it's all on the line. A dilapidated interior spoils the mood. Neglecting this will also cause issues like the sealants, waxes, finishes and other treatments that had been applied to get deteriorated, risking the structural integrity of the surface itself. Issues like water resistance and protection from rising damp are gradually reduced. Prevent things from going down this route by investing in quality surface care, which includes daily cleaning with products such as the Faber AlgaFloor.

When dealing with natural stone surfaces, cleaning is not just about getting rid of the dirt and grime. From granite to marble and limestone, these surfaces may be strong and hard, but they are porous, and sensitive to the pH of the solutions used. Products containing vinegar and lemon juice will etch the surface. Abrasive materials, from scrapers, microfiber scrub pads, steep wool and the like, will create scratches. Going for the ammonia-based cleaners will make them dull. You want a product that will be safe for your installation. You can find that in the AlgaFloor formulation.

Why Faber?

Faber has been in the business of developing surface care solutions for over 30 years now. These products cater to the diverse aspects of maintenance on walls, floors, kitchen and bathroom tops, plus stairways and even outdoor surfaces- from the installation stage, stone sealers and impregnators to provide protection against dirt and stains, epoxy systems, polishing compounds and abrasives that come it to maintain that shine on the surfaces, and stain removers that tackle both organic and inorganic stains, to formulations for day-to-day cleaning like the Faber AlgaFloor. They have partnered with the manufacturers of the different types of surfaces, in order to develop solutions that will effectively deliver on their mandate.

A commitment to quality, plus a solid track record, has seen the brand grow its footprint to major markets across Europe, China, Russia, Singapore and Japan in Asia, to the Gulf nations. Plenty of investment goes into research and development, and there are over 250 formulations catering to specific needs that have been released. It has even achieved certification such as ISO 9001:2008 for quality, and ISO 14001:2004 for the use of environmentally sustainable systems and processes. As such, by turning to their products, you can rest assured that you'll get a value return, joining the ranks of designers and architects, production companies, natural stone suppliers, realtors and building companies, cleaning contractors, installers, private clients plus the DIY enthusiasts around the world who rely on the brand.

Benefits Of Faber AlgaFloor

  1. Quality clean

With this formulation, you will be able to effectively carry out the routine cleaning program in your establishment. The Faber AlgaFloor gets rid of the dirt and grime that's on the surface, and accomplishes this without affecting the structural integrity of the underlying material. Whether it's in modern day busy homes, office complexes in need of reliable cleaning solutions, nursing homes, retail stores and even religious centres, AlgaFloor will be up to the task. It also leaves behind a pleasant fragrance that accentuates the ambience.

  1. No residue

When cleaning surfaces with conventional methods, one common issue is the surface film that is left behind. This accelerates the rate of resoiling, causing the areas that are worked on to get messed up sooner than had been anticipated, necessitating more frequent cleaning and resource wastage. You don’t want to be forced to redo the task just after a few hours after you had finished it. With the Faber AlgaFloor, you won’t have to worry about that. It accomplishes the task without any pesky residue being left on the surface.

  1. Neutral pH

The Faber AlgaFloor has been specifically formulated for use on polished surfaces, getting the job done without altering the surface appearance. It is also suitable for compact surfaces, and those that have low degrees of absorption. With the neutral pH, issues like corrosion or etching won’t occur. You can use it on granite, marble, clinker, ceramics including both glazed and craquelé, limestone and travertine, to agglomerates like quartz-resin, marble-resin and cement marble. It's also safe for use on porcelain stoneware, be it lapped, polished or even textured.

  1. Fast cleaning action

You don’t need to jump through hoops when using the Faber AlgaFloor. You can use it with the traditional cleaning tools like cloths and mops, opt for hard floor cleaners, or even go with the single disc machines when working on large floor areas. Start by sweeping or vacuuming the surface to remove the dust and loose debris, dilute the Faber AlgaFloor, and proceed to wash the surface. When you adhere to the recommended dilution ratios, you won’t even need to rinse the surface. These are: adding 4-5 capsules of the formulation in a bucket of water when dealing with natural stone surfaces, mixing 2-3 capsules of the product in a bucket of clean water when working on the ceramics, porcelain stoneware and quartz agglomerate.

  1. Economical

Each litre of the Faber AlgaFloor can be used on a whopping 900 - 1100m2 of surface. This high coverage enables you to work on massive areas with each unit you purchase. What’s more, given the pocket-friendly pricing of the product, you will be able to incorporate it into your establishment’s surface care program without putting undue strain on your budget. The product is available in different packaging, including boxes with twelve 1L bottles, 5L cans that come in 4 cans per box, plus the individual 10L cans. As such, you will be able to make the selection that units your establishment's needs.


Faber AlgaFloor


Write a review

Note: HTML is not translated!
    Bad           Good

When you order from cleanfast.ie, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!